Brand: SainSmart SKU: 101-60-198

[Discontinued] 4-Axis CNC Mach3 USB Motion Controller Card Interface Breakout Board

SKU: 101-60-198 3 reviews Variants ID: 32594242240591
$59.99 $89.99
Save $30.00
Free Shipping
  • The motion control card for machine control, with strong professional. Requires the operator to have the relevant expertise.
  • If used improperly, may appear an accident, please strictly follow the instructions and warnings using this product if you are not sure, consulting engineers for help.
  • First-time users, if you are not familiar with the product and software features Mach3 In your test product, make sure the machine's power switch on hand, you can quickly turn off the power.
  • Recommends that users install the emergency stop button and make sure the button is functioning properly. Please strictly follow the instructions and warnings using this product.
  • 1-year warranty and technical support from SainSmart.
  • The motion control card for machine control, with strong professional. Requires the operator to have the relevant expertise.
  • If used improperly, may appear an accident, please strictly follow the instructions and warnings using this product if you are not sure, consulting engineers for help.
  • First-time users, if you are not familiar with the product and software features Mach3 In your test product, make sure the machine's power switch on hand, you can quickly turn off the power.
  • Recommends that users install the emergency stop button and make sure the button is functioning properly. Please strictly follow the instructions and warnings using this product.
  • 1-year warranty and technical support from SainSmart.
  
FEATURE
  • Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
  • Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor;
  • general-purpose opto-couplers isolation input: can connect the limit switch, emergency stop switch, auto tool zero, home switch etc.
  • Support for connecting electronic handwheel;
  •  Have 0-10V signal output, you can use mach3 software to control the spindle motor speed.
  • general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other devices;
  • status LED indicates connection status on the board.
SPECIFICATION
  • Interface: USB connection to the computer
  • Power: 12-24V 10W
  • Driver Power: 12-24V

 

WHAT’S IN THE PACKAGE
1x SainSmart 4-Axis CNC USB Motion Controller Card Interface Breakout Board