Φ42mm ABS Dust Shoe Cover Cleaner, for 3018 775 Spindle Motor
200 Points for Free Shipping Redeem
Φ42mm Dust Shoe
This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
You may also like the Dust Shoe for Φ52mm spindle motor (compatible with PROVerXL 4030 & 3020-PRO MAX)
Replacement Base Bottom Cover
- This Bottom Cover is made of high-quality transparent ABS and preinstalled 20mm long nylon brush. Compatible with Genmitsu CNC Dust Shoes for 42mm and 52mm diameter spindle motors.
- The 20mm Nylon Brush is perfect for shorter cutting tools, such as V bits. Avoid snags and tangles. Don’t need to spend time reinstalling a new brush. Just replace the whole bottom cover when the brush is worn. One step replacement.
Make it cleaner
Enjoy a cleaner work area with our Genmitsu CNC Dust Shoe. This dust shoe is designed to be a high performing economical option for CNC routing.
What's included: 1 x 3018 Dust Shoe
Made of high-quality transparent ABS. The transparent and split design helps you keep an eye on your operations and replace the bits easier.
- Material: ABS
- Weight: 86g (0.18lb)
- Vacuum Port Outer Diameter: 38mm/ 1.5”
- Vacuum Port Inner Diameter: 32mm/1.26”
- Compatible Machine: Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3, 3018-MX3, 1810-PRO and other generic 3018-PRO CNC Machines
The planting 40mm long nylon brush is much tidy and firmer than other glued ones, it could maximize vacuum suction and help act as a dust sweep with high dust removal efficiency.
Note: Ideally the tip of the bit should be mounted to be level with the bottom of the bristles when they are refitted. If the bristles is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length, otherwise the bristles will be compressed against the top of the stock as it starts a cut.
Install the Top Cover of the dust shoe on the spindle with 2 pieces of M4x8 screws.
Align the magnets on the top of the Central Chamber with the magnets on the Top Cover and Bottom Cover .
Insert the vacuum cleaner tube with 32mm outer diameter into the tube connection of the dust shoe Top Cover
Which Dust Shoe Is Right For You?
|Spindle Diameter||42mm (1.65")||52mm (2.05")||69mm (2.72")||69mm (2.72")|
|Material||ABS||ABS & Aluminum||Acrylic frame||Acrylic frame|
|Vacuum Port Inner Diameter||32mm (1.26")||32mm (1.26")||38.1mm (1.5")||76.2mm (3")|
|Vacuum Port Outer Diameter||38mm (1.5")||38mm (1.5")||-||-|
(Not Genmitsu Product? Contact us for detail size guide.)
Other large size spindle
Other large size spindle
|With Short Brush Bottom Cover||No||Yes||-||-|