Lifetime customer support
eBox Lite Filament Dryer 3D Printer Filament Storage Dry Box
eBox Lite is safety designed and equipped with an enhanced heating mechanism using a Polyimide heater with a curved metal plate that has high thermal conductivity for fast heating and an air circulation fan for precise heat distribution and consistent temperature inside the dryer ensuring dry the filament effectively and quietly.
With a maximum filament capacity measuring ⌀200mm × 73mm(H), the eBox Lite is compatible with filaments with different spool weights and sizes. 500g, 1KG; 1.75mm, 2.85mm, 3mm
3D Printing Materials are more or less hygroscopic, which means that they absorb moisture from the environment if not properly stored. That's why you will find the filaments you stocked in shopping seasons contaminated by moisture, and when you print with a wet spool, issues like stringing and blobbing always come after you. The eBox Lite is a great solution to this pain. It keeps your filament dry by sealing it in an enclosed chamber, and brings your old filaments back to life by drawing the moisture from them, getting you off a great start in your 3d printing journey.
Fast and Precise Heating
- High performance polyimide heater allows for fast filament heating.
- Quiet Air Circulation Fan: Full-size metal plate with high thermal conductivity in combination with the quiet air circulation fan ensures even heating.
Fast Drying within 2 Hours
30 minutes of drying will bring a significant drop in the humidity level of your filaments. 2 hours of drying will bring your wet spool back to life.
What's included: 1x eBox lite Storage Box
Humidity & Temp Data
In common, when the filaments are put into eBox Lite and headted for 30 minutes, the hhumidity will drop significantly, and the temperature will quickly rise to about 40℃. An excellent drying effect will be achieved after 2 hours.
Adjustable Drying Temperature
The eBox Lite has an access hole and a tube that enables you to keep your filaments away from moisture and dirt while printing.
eBox Lite comprises a transparent build from where the amount of remaining material can be checked easily.
The eBox Lite has a timer you can set to dry spools for up to 18 hours to suit your needs.
eVacuum Sealed Bags Filament Storage Kit, 1 Spool & 2 Spools are available now.
The state of the filament you use is the key to the quality of your prints, the eVacuum 3D Printer Filament Storage Kit allows you to keep your filaments in tip-top shape with ease.
About PLA drying mode
It is not a type that sets a temperature, but a mechanism that selects the operation level from 1 to 3 (1=40 degrees, 2=50 degrees, 3=55 degrees). Since it comes with a fan, it can be agitated, but the fan is slightly noisy. According to the instructions, it is recommended to dry PLA at an operation level of 1 (40 degrees), but I think the temperature is insufficient. I think it depends on the room temperature and the condition of the filament, but in our environment it was a bit suspicious even at operating level 2. Regarding operation level 1, it may be appropriate to use it to prevent moisture during printing. Speaking of strength, I think a futon dryer is more powerful.
Works as described! Highly recommended for high quality prints!
Very easy to use. Unlike the other filament dryers on Amazon, this one has a built-in fan that ensures that the filament is heated evenly. No mods needed to make it work properly!