Nano V3 ATmega328-AU, Arduino Compatible

brand: SainSmart 7 SKU: 101-50-101 Variants ID: 45099867924

The Sain Smart Nano for Arduino is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly.

  • Automatic reset during program download
  • Power OK blue LED on the bottom
  • Green (TX), red (RX) and orange (L) LED
  • +5V to AREF jumper
  • Auto sensing/switching power input
  • Small mini-B USB for programming and serial monitor (cable not included)
  • ICSP header for direct program download
  • Power OK blue LED on the bottom
  • Standard 0.1” spacing DIP (breadboard friendly)
  • Manual reset switch
$12.99
DESCRIPTION

The  Nano can be powered via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
  • Microcontroller Atmel ATmega328
  • Operating Voltage (logic level) 5 V
  • Input Voltage (recommended) 7-12 V
  • Input Voltage (limits) 6-20 V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins 8
  • DC Current per I/O Pin 40 mA
  • Flash Memory 32 KB (of which 2KB used by bootloader)
  • SRAM 2 KB
  • EEPROM 1 KB
  • Clock Speed 16 MHz

 

WHAT'S IN THE PACKAGE
  •     1x ATmega328P-AU for Arduino Nano 3.0 Board
  •     1x mini USB Cable

Customer Reviews

4.9 Based on 7 reviews
5 ★
86% 
6
4 ★
14% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

G
12/14/2015
Gilbert

Happy Customer!

I'm fully satisfied with Atmel ATmega328-AU+Mini-USB Cable Full Compatible for Arduino Nano V3 A021. If you code with arduino software in a windows computer, you have to install FTDI driver and then choose the good port (COM 4 in my case). Thank you Sainsmart, Gilbert Tremblay

NR
10/14/2014
N. Reitzel

An Arduino, but Tiny

This is an Arduino with an ATmega328 processor on a small surface mount board. The board has pin headers that will fit a 600-mil 24-pin socket. Interconnect and power is supplied through a mini-USB connector. The board has pinouts and physical connections that make it mostly compatible with a Basic Stamp processor. However, this is not a drop in replacement for a Basic Stamp. Whether this part can be used to replace the stamp depends a great deal on the application. In particular, you should carefully evaluate the power requirements and I/O current requirements of the Nano versus the Basic Stamp. On the plus side - and I consider this to be a huge plus - this board comes complete with the entire Arduino ecosystem of development tools, prototyping kits, software, and libraries. Chances are, if you want code, someone has already written something close to what you need. Because the Arduino environment is entirely open, there are no proprietary barriers to using this product. The development suite is excellent, complete and effective, and the price (free) is hard to beat. All in all, I use this product, and highly recommend it.

P
01/02/2014
Pascal

Very nice Arduino compatible Nano!

I already get 3 of them, very nice little device! I received with each nano, a small USB cable and 25 Dupont wire cable female to female. Nice unexpected addition! I initially get some problem to connect with the mac (I didn't gets with Arduino Uno) but downloading the latest FTDI driver (looks ftdichip web site) and rebooting the mac solved it. The price is very good, and size is perfect for little applications.

K
01/02/2014
Kevin

Great

This product is good and cheap for all kinds of projects. Wide input voltage range and built in USB. I had one running non-stop for the past few months with zero issues.

J
01/02/2014
Justin

Amazing Arduino

This Arduino platform is, obviously, much smaller than the UNO or MEGA, DUE etc. So being able to just pop it into a breadboard is more convenient in most cases. For me the benefit of compactness and no headers, just plug-n-play meant far fewer wires were needed to connect to components and such given a breadboard's strips and how it powers-per-row.

A
01/02/2014
Anton

Got this great device today

When I didn't see COM port, based on previous reviews I thought that there is something wrong with the cable, but actually the cable is fine, this board uses FTDI chip, and requires drivers: [...] After installing drivers, everything worked perfectly.

W
12/13/2012
wdsgyr

useful product

It takes time to set it up. No matter how, it's a really good product,