Uno ATmega328P-PU, Arduino Compatiblebrand: SainSmart SKU: 101-51-100
The SainSmart UNO is a microcontroller board based on the ATmega328, and UNO is the most used board in the family of SainSmart boards. If you are starting out with coding, this is the board to get.
- Atmega8U2 programmed as a USB-to-serial converter.
- It can be powered via the USB connection or with an external power supply
- Recommend power: 7~12 V
The SainSmart UNO is a microcontroller board based on the ATmega328 (Datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The UNO differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter. Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limits)||6-20V|
|Digital I/O Pins||14 (of which 6 provide PWM output)|
|Analog Input Pins||6|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||32 KB (ATmega328) of which 0.5 KB used by bootloader|
|SRAM||2 KB (ATmega328)|
|EEPROM||1 KB (ATmega328)|
WHAT'S IN THE PACKAGE
- 1x SainSmart UNO
- 1x USB Cable
LOVE THIS PRODUCT
It is an excellent choice for me to buy it .It does help my experiment a lot. Fully compatible with Arduino.
I've bought quite a few SainSmart products and have always been very happy with you .Now this product is as exactly what I expected. the Arduino works perfectly.
I have bought two of these so far, and have had no problems with them to date.
not difficult to use
It contains everything needed to support the microcontroller; It works when I simply connect it to a computer with a USB cable.
Received exactly what was advertised. This is a very nice microcontroller. For me, this has been much fun; I like it very much.