RC200A Digital Temperature Controllerbrand: SainSmart SKU: 101-70-172
SainSmart RC200A Digital Temperature Controller Thermostat, High Precision with LCD Display,AC110V-240V,1 Relay with Sensor,50℃~110℃.
NOTE: US Power ONLY ship to US shipping address; EU Power ONLY ship to EU address.
- Temperature range: temperature from minus 50℃to 110℃
- Resolution: temperature 0.1℃
- Measurement accuracy: ±0.1℃
- Control precision:0.1℃
- Frequency refresh: 0.8 S
- Input voltage:AC110-240V(chance)
- Measuring input: DS18B20 Waterproof type sensor
- Output: relay 10A one channel
- Environments requirement:temperature from minus 10℃ to 60℃, humidity from 20% to 85%
- Product size:144mm(long)*99mm(wide)*44mm(high)
Start lights: The equipment is Start to work when the Status light is light on.
Stop lights: The equipment is stop working when the Status light extinguish
Status indicator light will blink frequently and buzzer alarm when the measured temperature is greater than 110℃ or measured temperature is less than -50℃
Start: set the temperature to start
Stop: set the temperature to stop
For example: Set the starting temperature is 20℃, Stop temperature is 15℃. Refrigeration equipment begins to work meanwhile the red indicator light is light when the detected temperature value is more than 20℃. Refrigeration equipment stop working meanwhile the red indicator light extinguish when the detected temperature value is less than or equal to 15℃.
2. Heating Mode :
The Heating equipment will start to work if the start temperature of set is less than stop and the temperature of testing is small or equal to beginning. If the testing temperature greater than or equal to stop temperature, the Heating equipment will stop to work.
For example: Set the starting temperature is 15℃, Stop temperature is 20℃. Heating equipment start to work meanwhile the red indicator light is light. When the detected temperature value is less than or equal to 15℃. Heating equipment stop to work meanwhile the red indicator light extinguish. When the detected temperature value is more than 20℃.
3. Temperature correction mode:
The system set temperature correction for positive and negative 9 degrees. The temperature calibration can be carried out if feel the temperature measurement is not accuracy or have a higher levels of thermometer.
1: Power off. 2: Hold down the Stop- button. 3: Power on.
At this time to enter the setting correction temperature and the "measured temperature word" sample disappeared, "Measured temperature" digital scintillation. Press "Start+" and " Start-" to adjust the correction temperature. The automatic return to normal state for 10 seconds and the "measured temperature" appeared. Under normal condition showing the temperature be equal to measured temperature A plus correction temperature B.
For example: Correction temperature B = -0.5℃, Actual measured temperature A= 25℃, Then showing the temperature is 24.5℃
- In the aspect of raising pets, the product can be applied to fish tank, aquarium and crawler box etc.
- In terms of farming, the product can be applied to incubation and brood, temperature rise and keep , ventilation and heat dissipation, temperature detection and warning etc.
- In agriculture, the product can be applied to strain culture fermented, seedling culture, green house, cultivation and management of flowers and edible fungi etc.
- In the aspect of intelligent home, the product can be applied to floor heating, water heating, heater, electrothermal membrane, electrothermal bed, electric blanket and electric fan etc.
- In terms of food, the product can be applied to make wine, fermented glutinous rice wine, flour fermentation , bean sprouts are cultivated , yogurt production, preservation of fruits and vegetables etc.
- In industry, the product is can be applied to temperature control cabinet, oven of experiment and warehouse monitor etc.
WHAT'S IN THE PACKAGE
- 1 x SainSmart RC200A Digital Temperature Controller Thermostat
- 1 x English manual