CNC MDF Spoilboard with Scale Grid for 3018 CNC Router
  • Lifetime customer support

  • US Shipping Priority

  • 15-Day Money Back Guarantee

Brand: Genmitsu SKU: 101-63-SP3018V2

CNC MDF Spoilboard with Scale Grid for 3018 CNC Router

SKU: 101-63-SP3018V2 2 reviews Variants ID: 39520942522447
$24.99

This MDF spoilboard is redesigned with scale 1-cm grids and 24 holes to fit most sizes of clamps, which is flexible for your configuration. The size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in), it is compatible with most 3018 CNC routers on the market. (eg. Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3)

 

A spoilboard is a disposable workbench mounted above the router’s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.

 

You May Also Like: Hold Down Clamps | Z-Axis Touch Probe | KABA Enclousre

Ship to
USA

This MDF spoilboard is redesigned with scale 1-cm grids and 24 holes to fit most sizes of clamps, which is flexible for your configuration. The size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in), it is compatible with most 3018 CNC routers on the market. (eg. Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3)

 

A spoilboard is a disposable workbench mounted above the router’s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.

 

You May Also Like: Hold Down Clamps | Z-Axis Touch Probe | KABA Enclousre

  

Genmitsu CNC MDF Spoilboard with Scale Grid for 3018 CNC Router | SainSmart

MDF Spoilboard with Scale for 3018

Precautions

  • Make sure the MDF spoilboard is secured well to the machine bed.
  • Make sure the CNC material is clamped tight to the MDF spoilboard / machine bed, or you will get vibration, chatter, poor cut finish, and can possibly break your cutting bit.
  • Do not use any lubricant when you use an MDF spoilboard. It will swell and expand if it gets wet. So using spray or mist coolant or oils is not recommended.
Genmitsu CNC MDF Spoilboard with Scale Grid for 3018 CNC Router | SainSmart

Compact Hole Distribution

Compared with the original MDF spoilboard, the hole distribution on this upgraded spoilboard is more compact. This makes it easier to fix various sizes of material and hold down clamps.
Recommended Clamps:
Genmitsu CNC MDF Spoilboard with Scale Grid for 3018 CNC Router | SainSmart

Scale Grid Design

A scale grid in centimeters is pre-printed on the spoilboard which makes the fixed position of the engraving material clear and accurate.

This spoilboard is greatly compatible with 3018 series router machines, including Genmitsu 3018-PRO3018-PROVer3018-PROVer Mach3.
Genmitsu CNC MDF Spoilboard with Scale Grid for 3018 CNC Router | SainSmart

More info

Specification:
  • MDF (Medium-Density Fibreboard)
  • Size: 300 x 180 x 12mm (11.81x 7.09x 0.47 in)
  • Hole Size: M6 Holes (6mm)
What's included:
  • 1x MDF Spoilboard
  • 1x Hexagon Socket Wrench (3mm)
  • 7x Screw (M5*16)
  • 7x Slider Nut (M5)
  • 1x Assembly Guide

Installation Guide

 

  1. Place the 6 pieces of M5 slider nuts into the recess of the aluminum plate, and then place the MDF spoilboard on top of the aluminum plate.
  2. Adjust the M5 slider nuts position so that the center of the slider nut hole and the center of the corresponding countersunk hole on the MDF spoilboard are concentric.
  3. Thread 6 pieces of M5*16 screws into the countersunk holes of the MDF spoilboard and screw the corresponding slider nuts for 3-4 turns.
  4. Align the MDF spoilboard with the aluminum plate all around, then tighten all the M5*16 screws.
  5. Once you have done so, try lifting your spoilboard at each corner to make sure that all T slot nuts have properly anchored to the bed. The spoilboard has been successfully installed, now you can enjoy making everthing!

 

 

Genmitsu CNC Upgraded

MDF GRID Spoilboard

Genmitsu CNC MDF Spoilboard

Dimensions:

300 x 180 x 12mm (11.81x 7.09x 0.47 inch)

300 x 180 x 12mm (11.81x 7.09x 0.47 inch)

Material:

MDF (Medium-Density Fibreboard)

MDF (Medium-Density Fibreboard)

Scale Grid:

YES

NO

Compatibility:

Most 3018 series router machines on the market

Most 3018 series router machines on the market

Hole Distribution::

24 holes in total, for better clamps mounting

16 holes in total

Hole Size:

M6 Holes (6mm)

M6 Holes (6mm)

Customer Reviews
5.0 Based on 2 Reviews
5 ★
100% 
2
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JA
11/02/2021
John A.
United States United States

Works great

Makes lining up my projects a lot easier.

RS
09/22/2021
Richard S.
United States United States

Works perfectly

Installs easily... works great!