Brand: Genmitsu SKU: 101-63-SP3018

3018 MDF Spoilboard for 3018-PRO, 3018-PROVer

SKU: 101-63-SP3018 7 reviews Variants ID: 32683627413583
$19.99 $24.99
Save $5.00

  • A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
  • Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11.8'' x 7'' x 0.5'')
  • Compatibility: Perfectly compatible with Genmitsu 3018 series CNC router kit.
  • Easy to Use: Easy to install the spoilboard with pre-installed threaded holes (6mm) for fixture clamps. Can be used with most bench clamping systems.
  • Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting

BFCM 20% OFF Exclusive Sale Eligible, Auto Applied At Checkout.
Valid 11.14-30, 2022 (PST), Learn More BFCM Flash Sale.

Ship to
USA
  • A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
  • Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11.8'' x 7'' x 0.5'')
  • Compatibility: Perfectly compatible with Genmitsu 3018 series CNC router kit.
  • Easy to Use: Easy to install the spoilboard with pre-installed threaded holes (6mm) for fixture clamps. Can be used with most bench clamping systems.
  • Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting
  

Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability.

Size: 30cm x 18cm x1.2cm.  (, 11.8'' x 7'' x 0.5''); M6 Holes (6mm)

Compatibility: Perfectly compatible with Genmitsu 3018 series CNC router kit.

Easy to Use: Easy install spoil board with pre-installed threaded holes (6mm) for fixture clamps. Can be used with most bench clamping systems.

Application: Often used when cutting or carving wooden materials. The MDF spoil board is used as a base to cut on so that your CNC table is not damaged by the cutting tool. It allows for stability in regard to your cutting material, resulting in more accurate cuts.

Precautions
Make sure the MDF spoil board is secured well to the machine bed
Make sure the CNC material is clamped tight to the MDF spoil board /machine bed, or you will get vibration, chatter, poor cut finish, and can possibly break your cutting bit.
You can not use any lubricant when you use an MDF spoil board. It will swell and expand if it gets wet. So using spray or mist coolant or oils is not recommended.

What's included

1 x Genmitsu MDF Spoilboard

➡ Installation Guide