Save $10.00
[Discontinued] SC05A, 1/8
Brand: Genmitsu SKU: 101-60B-005

[Discontinued] SC05A, 1/8" Shank, 2-Flute, Compression Spiral Bits Up-down Cut Set, 5-PCS

SKU: 101-60B-005 Variants ID: 32503181181007
$29.99 $39.99
Save $10.00

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Up&Down Cut Advantage: The compression bits (up-down bits) offers the benefits of both up and down cut bits. The bit is a standard down cut, but its tip is an up cutter. Therefore, when cutting materials like plywood, you will end up with a clean edge on both sides because the top is pushed down while the bottom is pulled up.

Cost-Effective: Including 5pcs 2-flute compression spiral bits, Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 12, 15, 25, 28, 32mm / Overall Length:40, 55, 60, 65mm.

Recommend Material: Laminates, composites, plywood, plastic, soft metal etc. Note that compression bits should never be used to drill deep holes.

Wide Compatibility: Genmitsu SC05A 2-Flute compression bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Up&Down Cut Advantage: The compression bits (up-down bits) offers the benefits of both up and down cut bits. The bit is a standard down cut, but its tip is an up cutter. Therefore, when cutting materials like plywood, you will end up with a clean edge on both sides because the top is pushed down while the bottom is pulled up.

Cost-Effective: Including 5pcs 2-flute compression spiral bits, Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 12, 15, 25, 28, 32mm / Overall Length:40, 55, 60, 65mm.

Recommend Material: Laminates, composites, plywood, plastic, soft metal etc. Note that compression bits should never be used to drill deep holes.

Wide Compatibility: Genmitsu SC05A 2-Flute compression bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

  

Genmitsu SC05A

5pcs 2 Flute Nano Blue Coat Compression Spiral Bits

 

  • 1 x 2 Flute Compression Spiral Bit (Cutting Length: 12mm, Overall Length: 40mm)
  • 1 x 2 Flute Compression Spiral Bit (Cutting Length: 15mm, Overall Length: 40mm)
  • 1 x 2 Flute Compression Spiral Bit (Cutting Length: 25mm, Overall Length: 55mm)
  • 1 x 2 Flute Compression Spiral Bit (Cutting Length: 28mm, Overall Length: 60mm)
  • 1 x 2 Flute Compression Spiral Bit (Cutting Length: 32mm, Overall Length: 65mm)
  • Material: Tungsten Carbide Steel Alloy
  • Surface : Nano Blue Coating
  • Cutting Diameter: 3.175mm
  • Shank Diameter: 3.175mm (1/8'')
  • Cutting Length: 12mm,15mm,25mm,28mm,32mm
  • Overall Length: 40mm,40mm,55mm,60mm,65mm
  • What project are you undertaking?
  • What are you cutting? Is it hard or soft wood? Is it stainless steel, fiberglass, MDF, acrylic, or aluminum?

Up-Down Cut

The compression bits (up-down bits) offers the benefits of both up and down cut bits. The bit is a standard down cut, but its tip is an up cutter. Therefore, when cutting materials like plywood, you will end up with a clean edge on both sides because the top is pushed down while the bottom is pulled up.

Wide Application

Laminates, composites, plywood, plastic, soft metal etc. Note that compression bits should never be used to drill deep holes. Genmitsu SN05-W01 2-Flute compression bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines

High Quality

The end mills are made of ultra-fine 0.2μm  that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

SPECIFICATIONS

Material: Tungsten Carbide Steel Alloy

Surface : Nano Blue Coating

Shank Diameter: 3.175mm

Cutting Diameter: 3.175mm

Cutting Length: 12, 15, 25, 28, 32mm

Overall Length: 40, 55, 60, 65mm

What's in the package

1 x Compression Spiral Bit (Cutting Length: 12mm, Overall Length: 40mm, 2 Flute)

1 x Compression Spiral Bit (Cutting Length: 15mm, Overall Length: 40mm, 2 Flute)

1 x Compression Spiral Bit (Cutting Length: 25mm, Overall Length: 55mm, 2 Flute)

1 x Compression Spiral Bit (Cutting Length: 28mm, Overall Length: 60mm, 2 Flute)

1 x Compression Spiral Bit (Cutting Length: 32mm, Overall Length: 65mm, 2 Flute)