Brand: Creality

Creality 3D Printer 1.6W Laser Engraver Module Attachment Kit

SKU: 101-91F-401 15 reviews Variants ID: 39258606731343

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.

Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size.

Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.

Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed.

Compatibility & Application: The laser module is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo.

Ship to

Magnetic Design for Easy Installation

Installation of this laser engraving attachment kit is a breeze. Wire up and clip it to the print head, and you can start engraving.

Adjustable Focus

Adjust the focus by rotating the laser head according to your working distance to find the optimal spot size.

Fast Heat Dissipation

Large aluminum heatsink, cooling DC fan, and added heat dissipation holes allow the laser attachment to handle long hours of working.

Safe Use Guidance

  • Protective eyewear must be worn while using.
  • Always be aware of the beam location. Keep it away from people's eyes and heads. Watch out for reflected beams from glass and shiny surfaces.
  • Unplug the laser head when not in use. The laser beam is controlled by the fan speed of your printer, if you start a regular print job without unplugging it, the laser will be on when the fan speed increases.
  • Software: G-code generator and profile can be download here.

Assembly Guide

Customer Reviews
4.2 Based on 15 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Michael W.
United States
Decent Quality and Good for the Cost

This works great for what it is. The speed is a bit slow to get a good burn on plywood and it takes alot of work to get the adjustments correct to burn the correct size and position. However if you take the time this product is a good inexpensive alternative to a standalone laser engraver product.

Amazon C.
United States
Laser not working

I a 3d printer ended and want to add this laser to it. I did everything it told me in the video except it will not let me enter in the panel the X, Y, Z. Can someone please help me?

United States
Great product!

Works well but I wouldn't recommend that software, I would use Creality Workshop instead, much better and quicker with no glitches. The Gcode generator by Opt Lazers is very glitchy and needs updates and wouldn't recommend!

United States
Very difficult to find software to run it

The machine is very well built. Having said that. And software for design and driving the machine is greatly lacking

Becky S.
United States
ender 3 v2 no grayscale

The laser will do outlines. It cannot do images. I tried to research a fix, but cannot find any. I already have a laser that can outline. I needed a laser to etch an image.THIS LASER CAN WORK ON 24 VOLT. IT HAS A CONVERTER INSIDE IT THAT STEPS DOWN TO 5 VOLTS. THE FAN IS THE ONLY PART THAT IS 12 VOLT REQUIRED.HELP FIND A FIX TO THE FREQUENCY PROBLEM OF ENDER 3 V2 FAN!

United States
Fun and inexpensive way to start lasering!

Love it. Still getting a feel for it, but having lots of fun. The software that comes with it is not good at all, but there's lots of free options out there that work fantastically well. Had a minor issue that customer service took care of quickly, and I'm very happy.

United States
Very Happy with this Purchase

Initially I had considered building my own cnc router to help learn but also primarily to try and save some cost. I'm super happy I decided on the 4030 instead. There's no way I would have ended up with anything nearly as high in quality. Not to mention having it fully up and running less than 24 hrs after the box showed up on my door step.It came with a full color assembly/start up manual which was fully sufficient. The pieces fit together great and the wiring harness was so easy to wire up. I really have no complaints

James W.
United States
Perfect add on laser

It is was so simple to connect to my CR-10s Pro V2. It took five minutes maximum. I love the magnetic attachment for adding the laser to the machine. Simple as heck. Plugs right in to the circuit board without effort. Etches very well .Cons: Instructions are mostly in Chinese and it does not explain things too well in English.

Linda S.
United States
awesome fun laser

I got this for my ender 3pro and works perfect easy to install and setup only part I want to set up is where I dont have to open the cover every time I want to hook it up...

Amazon c.
United States
Great product, great service

Excellent customer service.Received product missing a few screws and dust baffles. Prompt service response, and up and running in a few daysWill definitely buy again