Shop Categories
Filter by
Clear
- 0.5mm Radius
- 0.75mm Radius
- 1.0mm Cut Diameter
- 1.0mm Radius
- 1.25mm Radius
- 1.5mm Cut Diameter
- 1.5mm Radius
- 1.75mm Radius
- 10-Inch
- 12V
- 2 Flutes
- 2-Channel
- 2.0mm Cut Diameter
- 2.0mm Radius
- 2.5mm Cut Diameter
- 2.5mm Radius
- 3.0mm Cut Diameter
- 3.0mm Radius
- 3.2-Inch
- 3.5-Inch
- 3.5mm Cut Diameter
- 3mm
- 3V-32V
- 4 Flutes
- 4-Channel
- 4-inch
- 4.0mm Cut Diameter
- 4mm shank
- 5-Inch
- 5.0mm Cut Diameter
- 5V
- 5V-220V
- 6.0mm Cut Diameter
- 6mm shank
- 7-Inch
- 8-Inch
- 9-Inch
- ABS
- Assembled
- Ball Nose
- Basic
- Bundle
- Capacitive
- Chassis
- Complete
- Corner Radius
- CR-10 Series
- DDS
- DMT Series
- DSO
- DUE
- E-ink
- LCD
- Leonardo
- Long Neck Ball Nose
- Low Temp
- MEGA
- MEGA 2560
- MEGA ADK
- Micro Weighing
- NANO
- NoIR
- Optocoupler
- OWON
- PC-Based
- PLA
- Screwdriver
- Signal Relays
- Small Spool
- Soldering
- Solid State Relays
- Square
- TFT
- ToolPac Screwdriver
- ToolPAC Series
- Touch Screen
- TPU
- Ultimate
- UNO
- USB Relays
- wide angle
- WOOD
-
Mega 2560 R3 ATmega2560-16AU, Arduino Compatible
This is the new Arduino compatible Mega 2560 R3. The new ATMega16U2 chip allows for faster transfer rates and more memory. No drivers needed for Linux or Mac
- Adds SDA and SCL pins next to the AREF.
- Two new pins are placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes
- Works with all existing shields but also compatible with new shields that require the additional pins.
$18.99$23.99 -
-
Mega 2560 ATmega 16U2, Arduino Compatible
This is the new Arduino compatible Mega 2560. The new ATMega16U2 chip allows for faster transfer rates and more memory. No drivers needed for Linux or Mac
- Two new pins are placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes
- Works with all existing shields but also compatible with new shields that require the additional pins.
$16.99 -