1.8" TFT SPI LCD Screen with MicroSD Socketbrand: SainSmart SKU: 101-50-121
SainSmart 1.8" TFT LCD Display is an LCD with 128x160 color pixels and SPI interface, transmissive and normally white.
The TFT LCD Screen can display information from your Arduino, or display pictures. It's easy to get started with.
- 256K colors
- With built-in MicroSD socket
- Compatible with 3.3V/5V TTL logic
The TFT LCD Screen can display information from your Arduino, or display pictures. It's easy to get started with!! A great part of the LCD is that it has a built in microSD card socket, so you can store images on the microSD card socket, and even some text!
- Display Mode: 1.8" TFT SPI Interface, Transmissive, Normally white;
- Display Color: 262K colors;
- Backlight Type: LED
- Resolution: 128W * 160H Dots
- Board Size: 5.00 x 3.4cm
- View Area: 28.03W * 35.04H mm
- Dot Size: 0.06W * 3 * 0.18H mm
- Dot Pitch: 0.18W * 0.18H mm
- Viewing Angle: 6 o'clock
- SPI Bus interface
- IC Driver: ST7735R
- 5V/3.3V TTL logic Compatible, can be used in 5V/3.3V IO Arduino system directly
- GND : Power Ground
- VCC : 5V power input
- CS : Chipselect for LCD,
- SDA : LCD Data for SPI
- SCL : SCLK for TFT Clock
- RS/DC : Command/Data Selection
- RESET : LCD controller reset, active low
- CS (SD-CS) : Chipselect for TF Card,
- CLK (SD-Clock): SPI Clock
- MOSI (SD-DI) : SPI Master out Slave in
- MISO (SD-DO) : SPI Master in Slave out
WHAT'S IN THE PACKAGE
- 1x 1.8" LCD Screen
Hard to Mount
The LCD is a good deal for the price, but the position of the pins make it virtually impossible to mount this board in a case. Normally they would come out behind the display, but here the pins are flush with the display. When mounted inside a box, the display not be flush with the box. If your project is going into an enclosure, look carefully at the pins and make sure this will work for your needs.
Very Useful Display
I built a weather monitor (upgraded to a HVAC Controller) using this easy to use display. You can display a lot of information by using "pages" instead of trying to cram everything in at once.
Nice but Fragile
Received display, works as expected with nice resolution. Viewing angle a little limiting but for the price break not bad at all. My only grip is its fragility, and the firmware examples. First time I used it the LCD fell off the PCB only hanging by the cable. The software examples don't compile under Arduino sketch v1.0.4
good good good
I am just not satisfied with the packaging, the box is almost crushed. It may be broke on the long shipping way. But fortunately, my product is in a whole skin. It looks nice. After I tried to test it, I found this shield display well, and the effect is just what I expected.
It is a beautiful and clear screen. It makes my Arduino Raspberry Pi more powerful.
Very nice. What a deal! It worth this price! The customer service is good as well .Love sainsmart!
Exactly one week after placing my order for the LCD, it arrived via USPS, for only $12.99! The display works great with my Raspberry Pi. It has a good color depth and are extremely inexpensive.
Excellent transaction. Fast delivery. Exactly as described.
Faster delivery than expected! Quality appears good. Have not had chance to play with it yet. Have a couple of projects for it. Plenty of documentation and examples.
very good touch display
I was directed from a blog post www.whence.com/rpi , I bought this display to have a try it on Raspberry Pi, and it works well. I like it!
tiny but nice
Really nice with SD!