- 0.5mm Radius
- 0.75mm Radius
- 1.0mm Cut Diameter
- 1.0mm Radius
- 1.25mm Radius
- 1.5mm Cut Diameter
- 1.5mm Radius
- 1.75mm Radius
- 2 Flutes
- 2.0mm Cut Diameter
- 2.0mm Radius
- 2.5mm Cut Diameter
- 2.5mm Radius
- 3.0mm Cut Diameter
- 3.0mm Radius
- 3.5mm Cut Diameter
- 4 Flutes
- 4.0mm Cut Diameter
- 4mm shank
- 5.0mm Cut Diameter
- 6.0mm Cut Diameter
- 6mm shank
- Ball Nose
- Corner Radius
- CR-10 Series
- DMT Series
- Long Neck Ball Nose
- Low Temp
- MEGA 2560
- MEGA ADK
- Micro Weighing
- Signal Relays
- Small Spool
- Solid State Relays
- ToolPac Screwdriver
- ToolPAC Series
- Touch Screen
- USB Relays
- wide angle
This display features with 9 inch LCD and 1024x 600 high resolution. Its driver board, DMI/VGA/2AV+Reversing driver board, supports automatically switch to AV2.
- Simple DIY kit, easy to install.
- Operating voltage: 5V-12V wide voltage input
- With touchcreen function
- Supports all versions of Raspberry Pi
- Application of mobile DVD, digital photo frames, car systems, multimedia applications and other audio-visual systems
This is a TFT LCD Adjustable Shield for Arduino Mega2560
- Works in 3.3V, connect modules to Mega 2560 through this board
- Support both 16 bit mode
- Has an adjustable button for LCD display.
Thermoplastic polyurethane (TPU) is a high strength flexible material. TPU belongs to the TPE class of thermoplastics
- Specially formulated plastic with increased amount of flexibility, with rigid structure.
- Resistant to oil, grease and abrasions
- Weight: 250g per spool (approximately 0.55 lb)
- Diameter: 1.75mm (+/- 0.05mm)
- Shore Hardness: 95A
With SainSmart offline controller module, you can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.
The location of XYZ Axis can be adjusted manually as engraving starting point. The spindle open or close mode also can be controlled manually by this module.
Two-way Access The File
The engraving filed can be directly recognized once you put the file in the SD card. You can also connect the offline module to the computer by micro USB cable, then store the file directly.
Easy to Use
All you have to do is connect the offline module to the GRBL controller board, then you can control the CNC router with this module.
Compatible with SainSmart Genmitsu CNC Router
This offline module is perfectly compatible with SainSmart Genmitsu CNC Router 3018, 3018-Pro, 1810-Pro. (not compatible with MX-3)$24.99
The Pro32 is a staple tool for the hobbyist, tinkerer, or electrical engineer. Featuring a sleek body, complete with temperature adjustment buttons and an OLED display, the Pro32 feels good in the hand and offers a wide temperature range for operation. Its internal heating element warms up to operating temperature in just 12 seconds!
With the help of dual temperature sensors, the internal heating element reaches its operating temperature extremely fast—just 12 seconds! The tip temperature can be set between 212° F and 752° F (100° C to 400° C) using the adjustment buttons and OLED display.
New Power Supply Design
The Pro32 features an integrated DC5525 12-24V connection. Its anti-static design isolates the temperature sensors from extraneous surges.
Tough & Portable
The sleek, slim design is comprised of an SAE 304 stainless steel core, housed inside a polycarbonate shell with an easy-to-read OLED display.
Smart & Safe
The integrated STM32 processor chip automatically regulates the Pro32’s “sleep mode”, “standby”, and “operating mode”, ensuring the safety of the user.$69.99
The SainSmart UNO is a microcontroller board based on the ATmega328, and UNO is the most used board in the family of SainSmart boards. If you are starting out with coding, this is the board to get.
- Atmega8U2 programmed as a USB-to-serial converter.
- It can be powered via the USB connection or with an external power supply
- Recommend power: 7~12 V
- Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs. (0.8-3.0mm Set)
- Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm), 10Pcs. (1.5-3.175mm Set)
- Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing. Suitable for milling and cutting(PVC, PCB, acrylic)
This is the latest version of CNC Router 3018-PRO, equipped with an all-new design controller board that provides better heat dissipation. Our new power adapter has been redesigned, with CE, FCC & PSE certifications, that ensures complete protection for you and your machines. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.
Genmitsu CNC Router PRO is an upgraded version of Genmitsu CNC Router. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.
Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise.$239.99