Micsig High Voltage Differential Probe for Oscilloscope, DP10013
Brand: SainSmart SKU: 101-10-184-01 7 SKU: 101-10-184-01- Lightweight and portable, easy to carry.
- Designed for the measurement of high voltage differential signal, to meet the demand for floating measurement.
- Power supply USB DC 5V output, more portable while Oscilloscope has USB interface.
- Simple design, it is easy and safe to use.
- Maximum differential test voltage (DC+ACPK-PK): 130V (50X), 1300V (500X)
Micsig DP10013 High Voltage Differential Probe
Micsig DP10013 High Voltage Differential Probe is designed for professionals and experts like you to be used with most oscilloscopes in the market. It allows you to safely measure floating voltages up to 1,300V and has a bandwidth up to 100 MHz. DP10013 can work in two different attenuation ranges: 500X for a maximum test voltage of 1300V and 50X for a maximum test voltage of 130V.
While its Tektronix counterparts, such as P5200A, Micsig DP10013 offers the same specifications at unbeatable low price that won’t break your bank.
Designed for the measurement of high voltage differential signal
Simple design, it is easy and safe to use.Conveniently powered by 5V USB, you can take Micsig DP10013 to work anywhere with the free lightweight storage box. In the box, in addition to the probe, you will find:
- Two 24-inch input cables, in red and black pairs
- Two hook clips, in red and black pairs
- Two alligator clips, in red and black pairs
- Two Pincer clips, in red and black pairs
- 35-inch output cable * USB power cable
Its applications include:
- Floating Measurements
- Switch-Mode Power Supply (SMPS)
- Motor Drive Design
- Power Device Testing & Evaluation
- Power Converter Testing & Design
Lightweight and portable, easy to carry
Designed for the measurement of high voltage differential signal, to meet the demand for floating measurement.
Powered by USB, no additional 220V AC power is required
No mechanical switch, self-luminous button.
Self-calibration, physical stability
High quality plug-in cards, optimized to good signal quality.
DESCRIPTION
Micsig DP10013 High Voltage Differential Probe is designed for professionals and experts like you to be used with most oscilloscopes in the market. It allows you to safely measure floating voltages up to 1,300V and has a bandwidth up to 100 MHz. DP10013 can work in two different attenuation ranges: 500X for a maximum test voltage of 1300V and 50X for a maximum test voltage of 130V.
While its Tektronix counterparts, such as P5202A, starts at $1,500, Micsig DP10013 offers the same specifications at an unbeatable low price that won’t break your bank.
Its application includes:
- Floating Measurements
- Switch-Mode Power Supply (SMPS)
- Motor Drive Design
- Power Device Testing & Evaluation
- Power Converter Testing & Design
Conveniently powered by 5V USB, you can take Micsig DP10013 to work anywhere with the free lightweight storage box. In the box, in addition to the probe, you will find:
- Two 60cm input cables, in red and black pairs
- Two hook clips, in red and black pairs
- Two alligator clips, in red and black pairs
- Two Pincer clips, in red and black pairs
- 90cm output cable
- USB power cable
The latest upgraded version DP2003 is now available！ Check out what is new!
SPECIFICATION
|
Model |
DP10013 |
|
Bandwidth |
100MHz |
|
Rise Time |
3.5ns |
|
Range Selection (Attenuation Rate) |
50X, 500X |
|
Accuracy |
±2% |
|
Max. Differential Test Voltage (DC+ACPK-PK) |
130V (50X); 1300V (500X) |
|
Max. Input Common Mode Voltage (DC+ACPK-PK) |
130V (50X); 1300V (500X) |
|
Max. Input Voltage-to-Earth |
1000V CATII |
|
CMRR |
>80dB (DC); >60dB (100KHz); >50dB (1MHz) |
|
Input Impedance |
10MΩ/1pF (differential); 5MΩ/2pF (Single-ended to ground) |
|
Output Voltage |
>3V |
|
Overoad Alarm |
Button light flashes |
|
Power Supply |
DC 5V, USB supply |
|
Power |
0.85W |
|
Dimension |
14.5cm x 6cm x 2.7cm |
|
Input Cable Length |
Approx. 60cm |
|
Operating Temperature |
0℃ ~ 40℃ 32℉ ~104℉ |
|
Operating Humidity |
10%-85%RH |
|
Storage Temperature |
-30℃ ~70℃ -22℉~158℉ |
|
Storage Humidity |
5%-90%RH |
WHAT'S IN THE PACKAGE
- 1x Micsig DP10013 1300V 100MHz High Voltage Differential Probe for Oscilloscope
- Reviews
- Questions
Compares favorably to the Tek differential probe I have at work.
Diff probes have always been expensive, beyond a reasonable cost for their functionality. Now we have the Micsig and most can now take advantage of this technology. I'm quite pleased with the performance vs. price. However, it would be nice if the divider was 10/100.
High quality, exactly as promised. Fast shipping and excellent customer service!
Works well and for such a good price. Very satisfied.
I have been really impressed with this probe, I don't think the price/performance can be matched. Great for SMPS work!
I always hesitated purchasing a differential probe due to their demanding high prices; however, when I read Micsig's DP100013 specifications and the selling price in Sainsmart I placed my order immediately. In the analog days, some of us in school experienced using the Tektronix Type G differential amplifier (vacuum tube based plugin unit), once you passed a few tests you were allowed to move up using the Tektronix 7A22 Differential amplifier or the 7A13 Differential compactor (plugins for the Tektronix 7000 series scopes). Even back in those days prices for these differential tools were beyond the reach of students or professionals. But now, thanks to Micsig and Sainsmart, hobbies, students and professionals can afford one of two differential models produced by Micsig - there are other GREAT known Differential probes produced by other manufactures sold in Sainsmart, but I decided to purchase Micsig for the low price. I will be using the DP100013 in switching power supplies repair and design. Thank you Micsig and Sainsmart.
Great product for a reasonable price. Comes in a sturdy box. Only drawback I see is that is that the minimum divider is 50x, which limits the possibilities to measure small voltages.
Does "floating" mean isolated? I don't want a grounding problem to blow the ass out of my scope.
Answer:Yes it is isolated from the scope ground That is why it use a separate 5 volt power supply
Does the probe set come with a hard case?
Answer: Yes
Is this a bnc connector? would it work with a pico 2000 scope?
Micsig DP10013 is definitely a BNC connector, it suitable for all oscilloscopes with BNC interface.
