![[Discontinued] NEMA-17 2-Phase 4-Wire 1.5A 60mm 1.8° Stepper Motor for 3D Printing & CNC](http://www.sainsmart.com/cdn/shop/products/101-91-212-2_large.jpg?v=1508147514)
Brand: SainSmart
SKU: 101-91-212
[Discontinued] NEMA-17 2-Phase 4-Wire 1.5A 60mm 1.8° Stepper Motor for 3D Printing & CNC
SKU: 101-91-212
$19.99
- 1m wire, one connect electrical machine, on the other end has variety optional ports; heat shrink tubing effect to prevent the wire tangled up
- D-shaped axle with 22mm, electrical machine with high-torque, high-speed, low noise
- Suitable for 17HD60001-22B mixing type stepping motor
- Outside view: Shown as the pictures
- Drive mode: Chopping wave constant current drive
- Exciting mode: Two-phase 4-wire. It is available for rotation of forward and reverse
- Swerve: The order of power is AB-BC-CD-DA, from shaft end to see C.W
- Rated current (one-phase): 1.5A DC
- Rated voltage: 2.4V
- Stepping angle: 1.8°
- Insulation grade: B grade
SPECIFICATION
- Operating Conditions: Environment Temperature: -20~50?; RH: 90%MAX; Mounting Position: Axis horizontal or vertical installation
- Direct-current winding resistance (25?): 1.6Ω±10%
- Wnding inductance: 3.6mH±20%
- Cogging torque: 40mN.m REF
- Holding torque: �00mN.m(I=1.5A)
- Max. no-load starting frequency: �200pps
- Max. no-load running Frequenc: �000pps
- Temperature rise: <80K
- Step Angle Accuracy: 1.8°± 5%
- Rotary inertia: 102g.cm2
- Motor Weight: 0.48Kg/PC REF
- Insulation resistance: Cold insulation resistance should be more than 100mΩ (between the Motor stator core and Terminal)
- Dielectric strength: The space between the Motor stator core and Terminal should be able to withstand AC600V/1s without breaking down. Leakage current is less than 1mA.
- Size(L*W*H): Approx. 42 x 42 x 60mm / 1.65 x 1.65 x 2.36 inch
WHAT’S IN THE PACKAGE
- 1x Nema 17 2 Phase 4-Wire 1.5A 1.8° Stepper Motor for 3D Printer
- 1x Cable
