Brand: SainSmart SKU: 101-50-300

[Discontinued] Uno Learning Kit, Compatible with Arduino, Basic Edition (SHO)

SKU: 101-50-300 Variants ID: 48146929748
$29.99

Want to learn coding but don't know where to start? With this SHO project-based learning kits is the beginner's guide to programming.

  • All-in-one kit, a great starter kit for learning coding. 
  • Includes Uno Revision 3 ATmega328P-PU 16U2, fully compatible with Arduino
  • It contains most common and useful components like precision potentiometer, Capacitor, Resistor and breadboard.
  • Updating 18 projects manual and code for the kit, we provide all-rounded after sale service and support.

Want to learn coding but don't know where to start? With this SHO project-based learning kits is the beginner's guide to programming.

  • All-in-one kit, a great starter kit for learning coding. 
  • Includes Uno Revision 3 ATmega328P-PU 16U2, fully compatible with Arduino
  • It contains most common and useful components like precision potentiometer, Capacitor, Resistor and breadboard.
  • Updating 18 projects manual and code for the kit, we provide all-rounded after sale service and support.
  

Basic edition (SHO)

Deluxe edition (CHIKU)

Ultimate edition (BAI)

What's the different between these editions?

A: The previous edition is part of the later one. 

The ultimate edition contains all the parts that previous editions have, and we carefully prepared more components (e.g. LCD, water sensor) and projects ( e.g. RFID) to inspire creativity. It's recommended for beginners who wants to get hard core on Arduino.

 

DESCRIPTION

Building some creative and simple projects is a great way to walk through coding and basic electronic circuits knowledge.

The SHO kit includes a selection of the most common and useful electronic components with a manual of 18 projects.  

  • Project1--Hello_World
  • Project2--LED_Flashing
  • Project3--Traffic_Lights
  • Project4--Flowing_LED_Lights
  • Project5--Button
  • Project6--Answer_Machine
  • Project7--Active_Buzzer
  • Project8--Passive_Buzzer
  • Project9--Analog_Read_Serial
  • Project10--Potentiometer_control_LED
  • Project11--Photoresistor_control_LED
  • Project12--Photoresistor_control_Buzzer
  • Project13--7-Segment_Display
  • Project14--4-Bit_7-Segment_Display
  • Project15--Dot-Matrix_LED_Display
  • Project16--RGB_LED
  • Project17--LM35_Temperature_Sensor
  • Project18--Servo

Click here or visit learn page for tutorial 

 

SPECIFICATION

Uno R3

  •   ATmega328P-PU microcontroller
  •  Input voltage - 5-10V
  •  5V Electric current : 500MA
  •  3.3V Electric current : 50MA
  •  14 Digital I/O Pins (6 PWM outputs)
  •  6 Analog Inputs
  •  32k Flash Memory
  •  16Mhz Clock Speed

 

WHAT'S IN THE PACKAGE
  • 5 × 5mm LED red/blue/green/white (total 20pcs)
  • 32 × Jumper wires
  • 10 × Resistor 220+300+470+1K Ω (total 40pcs)
  • 1 × RGB LED module
  • 1 × 40pin T-shape expansion board + breadboard +  cable
  • 1 × Buzzer
  • 2 × PNP Triode 8550
  • 1 × single channel relay module
  • 1 × SG90 servo
  • 2 × L293D chip
  • 1 × DC motor
  • 2 × 74HC595
  • 4 × 8 segment digital tube 
  • 1 × HC-SR04 ultra sonic module
  • 1 × LCD1602
  • 1 × Potentiometer 10kΩ
  • 1 × dot matrix
  • 8 × buttons 12*12*8
  • 20 × Dupont wires male to female
  • 2 x Photoresistor
  •  

    Learn