Brand: SainSmart.com SKU: 101-50-301

[Discontinued] Uno Learning Kit, Compatible with Arduino, Deluxe Edition (CHIKU)

SKU: 101-50-301 Variants ID: 31884574818383
$27.99 $45.99
Save $18.00

The SainSmart Starter Learning Kit, compatible with Arduino - CHIKU is a great way to get started with coding and electronics. It includes the components you need to make fun projects. This is specially suitable for beginners. All-in-one kit, a great starter kit for learning coding. Microcontroller Board: Uno R3 ATmega328P-PU 16U2, fully compatible wit Arudino Great for robot prototyping: Includes Servo&motor, Ultrasonic sensor, Relay, LCD module and etc Updating projects manual and code for the kit, we provide all-rounded after sale service and support.

The SainSmart Starter Learning Kit, compatible with Arduino - CHIKU is a great way to get started with coding and electronics. It includes the components you need to make fun projects. This is specially suitable for beginners. All-in-one kit, a great starter kit for learning coding. Microcontroller Board: Uno R3 ATmega328P-PU 16U2, fully compatible wit Arudino Great for robot prototyping: Includes Servo&motor, Ultrasonic sensor, Relay, LCD module and etc Updating projects manual and code for the kit, we provide all-rounded after sale service and support.

  

Basic edition (SHO)

Deluxe edition (CHIKU)

Ultimate edition (BAI)

What's the different between these editions?

A: The previous edition is part of the later one. 

The ultimate edition contains all the parts that previous editions have, and we carefully prepared more components (e.g. LCD, water sensor) and projects ( e.g. RFID) to inspire creativity. It's recommended for beginners who wants to get hard core on Arduino.

 

DESCRIPTION

Building some creative and simple projects is a great way to walk through coding and basic electronic circuits knowledge.

The CHIKU kit includes a selection of the most common and useful electronic components with a manual of projects.  

 

SPECIFICATION

Uno R3

  •   ATmega328P-PU microcontroller
  •  Input voltage - 5-10V
  •  5V Electric current : 500MA
  •  3.3V Electric current : 50MA
  •  14 Digital I/O Pins (6 PWM outputs)
  •  6 Analog Inputs
  •  32k Flash Memory
  •  16Mhz Clock Speed
 
 
WHAT'S IN THE PACKAGE
  • 1x SainSmart UNO R3
  • 1x USB cable
  • 1x HC-SR04 Ultrasonic Sensor Distance Module
  • 2x L293D
  • 1x Relay Module
  • 2x Photoresistor
  • 1x Servo motor
  • 1x Active Buzzer
  • 1x Passive Buzzer
  • 2x 7-segment Display
  • 1x 4 Bit 7-segment Display
  • 1x SS8050 NPN Transistor
  • 1x 8*8 Dot Matrix LED Display
  • 1x LM35 Temperature Sensor
  • 2x potentiometer
  • 8x Button
  • 32x Jump Wires
  • 1x 9V battery cord
  • 10x (220 ohm + 1k ohm +10k ohm) resistor
  • 4x 10/100uF Capacitor
  • 1x Breadboard
  • 2x 74HC595 Chip
  • 1x LCD 12864
  • 1x SainSmart Prototype Shield
  • 2x Tilt Sensor
  • 1x Stepper Motor Driver Board
  • 1x Hall Sensor
  • 1x Stepper Motor
  • 1x Infrared Remote controller
  • 1x Infrared Receiver
  • 1x 2.54mm Straight 40 Pin Header
  • 1x 2.54mm Elbow 40 Pin Header
  • 1x DC Motor
  • 1x MPU 6050 Module
  • 2x Joystick Module
  • 1x PIR Motion Sensor
  • 1x 5mm RGB LED
  • 10x Red LEDs
  • 10x Green LEDs
  • 10x Blue LEDs
  • 10x Yellow LEDs
  • 10x Female-Female Dupont wires
  • 10x Male-Female Dupont wires

Learn