Genmitsu PROVerXL 4030 CNC Router with Carveco Maker SubscriptionSKU: 101-60-4030prover
The Genmitsu PROVerXL 4030 Benchtop CNC machine is a new class of easy to assemble and ready to go kits. It's great for an endless variety of cutting, drilling, and carving operations on a variety of materials including wood, MDF, plastics, foams, vinyl, and aluminum.
Take your creativity to the next level working with REAL materials and the Genmitsu PROverXL 4030 Desktop CNC.
*Please do not update the firmware, it will make the control board operate incorrectly.
*This product is excluded from all promotions and discount codes.
Not only is it larger it also features a completely redesigned control box and drive system, beefy C-BEAM frame, precision NEMA 23 stepper motors, high Power Spindle and adapter for a drop in Dewalt DWP611 upgrade.
The pre-assembled module of X, Y, Z axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time. Bundled with CARVECO MAKER (3-Month, a $45 value; 12-Month, a $180 value), easily create your next project.
Rigid C-Beam structure, Leadscrew Driven, Y-axis Dual screw drive, Z-Axis Optical Axis Drive deliver more stability than the traditional v-slot drive. It's ideal for an endless variety of cutting, drilling, and carving operations on various materials including wood, MDF, plastics, foams, vinyl, and aluminum.
400 x 300 x 110mm (15.75 x 11.81 x 4.33 inch)
C Beam Structure and Linear Rails
ACME Leadscrew (T10)
NEMA 23 (2 Phase, 3A)
300W 6A, 12,000 RPM
Aluminum DeWalt DWP611 Mount (DWP611 router not included)
0.01mm (0.000393701 inch)
600W, 7A, 0-48V
Candle, Carveco Maker, Easel
X, Y, Z Limit Switches + ESTOP
X-658mm , Y-528mm, Z-208mm
T10 2mm pitch, 5mm lead 5 start acme leadscrew
641 x 755.5 x 580mm (25.23 x 29.74 x 22.83 inch)
400 x 200 x 60.7mm (15.75 x 7.87 x 2.39 inch)
1 x Genmitsu PROVerXL 4030 CNC Router (Some parts need to be assembled)
1 x Pre-Installed 300W Spindle
1 x Controller Box
1 x MDF Spoil Board
1 x Aluminum DeWalt DWP611 Mount (DWP611 router not included)
10 x Nano Blue Coat Bits (1/8” Shank, Cutting Edge Diameter 0.8-3.0mm)
10 x Engraving Bits (1/8” Shank, Cutting Edge Diameter 0.2mm, 30 Degrees)
4 x Clamps
1 x Screw/Nut Accessories Box
like other users here I came from a 3018 and similar units, all of which have I have pushed to their absolute limit (aka destroyed). this machine is quite simply in another class altogether. I wanted a better grbl machine that I could swap in for my 3018 and this machine literally plugged right in worked the first time after setting up in easel. fairly easy to put together, aside from some quirks and issues with the instructions, which is entirely part of the game with these machines. here are the idiosyncrasies I came across. - the manual tells you to “install” the couplings on the lead screws before you install the motors and motor mount. this can misleading because what you want to do is only slide the coupler on to the lead screw, then install the motor assembly, position the coupler, then lock down the coupler with its set screws/collar. don’t “install” the coupler straight away on the screw or it probably won’t be in the right position once you actually install the stepper motor. - my frame needed adjustment to be square and sit flat. find a perfectly flat surface, loosen all the frame bolts and settle the frame down to the surface, square it and the retighten everything. the manual mentions some of this. - even after adjusting the frame I still had one small bolt/hole alignment issue where the cable track attaches to the frame. I had to use a clamp to pull it into alignment. - some of the limit switch cables came stuffed way up inside the cable track, requiring me to fish them out with various tools. in the process I stupidly broke one of the limit switch wire connectors and had to put it back on, which wasn’t fun at the very end of the build. totally my fault but just be aware that the cable ends may be hidden way up in the track, and should be pulled through with care. overall could not be happier with this machine!
I'm really excited to use the 4030 and it just look amazing, but mine unfortunately came with a few missing parts. Fortunately, Sainsmart has great customer support and is sending me the appropriate parts, but I would have really liked to have had this ready out of the box. Regardless, it's a great entry level machine with great capabilities and I'm sure as these get manufactured more that they will get more efficient!
The package arrived very quickly, I must see that everything is fine, in a few days I will be assembling the machine and I will update this review, I will give more details and photos. Thank you.
Assembly is very easy. The machine has a good look and is a great size.
I just received my PROVerXL 4030 this week. It is very well constructed with robust components that were easy to assemble. It fired right up and I was carving in no time. I was using a 3018 before, and there is simply no comparison in the performance of this machine. I can’t wait to see the upgrades and accessories when they are available. I think this machine is very fairly priced for the quality of the components and the overall performance!