SainSmart Genmitsu CNC Router 3018-PROVer Kit

brand: SainSmart 13 reviews SKU: 101-60-3018PROVER Variants ID: 31600881467471
  • Class leading value got even easier to use.
  • The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
  • Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
  • Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.
  • Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for immediate shutdown of your machine.


*Join SainSmart Genmitsu CNC Router Facebook Group.

Note: Buyers may be responsible for paying additional import duties or taxes that apply to cross-border purchases. UK adapter not included in this CNC router.

Ship to

Efficient Pre-assembly

The 3018-PROVer is the newest addition to the Genmitsu CNC 3018 series family. This pre-assembled desktop CNC machine allows you to be up and running in 15 minutes instead of 2 hours, making it no challenge for beginners.

High Quality

Boasts an all-aluminum body with an oxide blue look, the 3018 PROVer gives you a premium look and feel for your machine.



Safety Design

The 5mm acrylic baffles can block the 'flying' pieces of wood/other cutaway materials so that you can safely monitor the engraving process.

Offline Controller with 1.8" TFT LCD Display

This machine comes standard with a newly designed offline controller with 1.8" display so you can view readouts clearly and control the CNC router without connecting to a computer.

Laser Module Available

If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the matching SainSmart laser module kit to the machine. With this module, it can absolutely give you different ways to unleash your creativity.


Genmitsu 3018-PROVer is the successor to the 3018-PRO, and the new version has brought improvements to many parts, including the excellent design and safety features, pre-assembly, upgraded mainboard, etc. Whether you’re a CNC beginner, a hobbyist or a small business owner looking for an enterprise-quality for commercial purposes, this is an excellent choice.

  • Effective Engraving Area: 260 x 155 x 35mm(10.2 x 6.1 x 1.4”)
  • Frame Size: 400 x 330 x 240mm(15.7 x 13.0 x 9.4”)
  • Frame Material: Aluminum
  • Z-Axis Component Material: ABS
  • Spindle: 775 motor, 12V~24V, 10000 RPM;
  • Rated power: 60W; Maximum power: 120W
  • Step Motor: 1.3 A, 12V, 0.25 Nm torque (2.2 in-lb)
  • Drill Bits: Tip 0.1 mm, 20 degrees, Diameter 3.175 mm
  • Supported OS: Windows XP, Windows 7 32/64 bits, Windows 8, Windows 10, Linux, Mac OS
  • Software: Grbl control(Candle) 
  • Power Supply: 24V/5A, with CE, FCC & PSE certifications
  • Perfect for: Hobbyists, Crafters, Woodworkers, Industrial Designers, Educators, Engineers, Jewelers and more!

Standard Kit

  • 1 x 3018-PROVer CNC Router Machine (Some parts need to be assembled)
  • 1 x Offline Control Module
  • 1 x Tools Box
  • 1 x Screw/ Nut Accessories Box


Genmitsu 1810-PRO  Genmitsu 3018-PRO  Genmitsu 3018-PROVer  Genmitsu 3018-MX3 
Assembly Time 2 hours 2 hours 15 minutes 2 hours
Working Area 180x100x45mm 300x180x45mm 260 x 155 x 35mm 260x155x35mm
Control Software GrblControl(Candle) GrblControl(Candle) GrblControl(Candle) Mach3/DrufelCNC
Driver Chip DRV8825 DRV8825 TB67S109 TB67S109
Home and Limit switches x x
Emergency-Stop x x x
Z-Probe x x
Acrylic Baffles x x
Comes with Offline Controller? x
Switchable to Laser Module?
Customer Reviews
4.8 Based on 13 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Larry R.
United States United States

It's been a learning experience but I love it.

Bill L.
United States United States

Not quite the 15 minutes to assemble as advertised but in 2 hours I had it done. The SD card was a big help since the video shows you the steps to assemble as you follow along with the manual. Next is downloading the software and doing a test carving.

Robert R.
United States United States
Nice CNC Router Kit

The CNC Router Kit is really well done. The instructions and descriptions of the items are very professional. The instructional video and the starter software helped me get the system up and running in one afternoon. There is a lot to learn and it is a very instructional system. I am still waiting on the delivery of the laser part of the kit that I am told was shipped separately. SainSmart Genmitsu CNC Router 3018-PROVer Kit Review
Christopher Z.
United States United States
So far so good

Just received my order, assembled it last night I will be testing it over the weekend. I was pleased with the ease of the assembly and the build quality is very nice.

Jimmy V.
United States United States
Really fun putting this machine together!

Great product - up and running with Candle on a MacBook Air. So far so good - looking forward to setting up the laser next. SainSmart Genmitsu CNC Router 3018-PROVer Kit Review
Thomas J.
United States United States
Genmitsu CNC Router 3018-PROVer Kit ....Sweet....!

Delivered has advertised...…Great...…!

A Customer
Jacqueline L.
United States United States
Excellent value

A great starter kit.

James S.
United States United States
Solid little unit

Easy to assemble, very capable for price/size, works like a champ with my Mac

Lawrence S.
United States United States


Sean B.
United States United States
Better than expected

I spent longer than I thought setting it up. Even with pre-assembly I spent a good 5 hours putting it together, wire management, and computer set up. It came with some wire mounts and zip ties that make it look nice after some wire management. I would recommend getting PTFE Teflon dry lubricant for the lead screws.

    User Manual

    Assembly Video

    Download Driver for Windows 

    Download Driver for Mac OS

    Youtube Test and Review Video

    How to Design & Cut with Easel

    PROVer Master Document

    Software Links

    LaserGRBL The best free GCode sender for DIY Laser Engraver. LaserGRBL is able to load and stream GCode path to arduino, as well engrave images, pictures and logo with internal conversion tool. Can click here to buy a laser module.

    LightBurn is a premium version of LaserGRBL which allows you powerful tools for editing, adjusting the layout and controlling your laser. LightBurn is a native application written for Windows, Mac OS, and Linux. Can click here to buy the LightBurn GCode License Key.

    Easel is the all-in-one software solution for 3D carving machines. Designed by Inventables, Easel is the easiest way to get started in the world of 3D carving.

    Fusion 360 Integrated CAD, CAM, & CAE software for everyone. Animation. Access Anywhere. Easy Collaboration. Try It Free. Integrated Design Tools. Next-Gen 3D CAD/CAM. Fabrication.