News

Engraving Vinyl Records with 3018-PRO

Engraving Vinyl Records with 3018-PRO

Written By Patrizio Virtuani   WARNING! Do not try to cut vinyl with a laser, the heat of the beam on the vinyl surface generates a very toxic gas, vinyl...

2 comments

Engraving Vinyl Records with 3018-PRO

Posted by SainSmart on

Written By Patrizio Virtuani   WARNING! Do not try to cut vinyl with a laser, the heat of the beam on the vinyl surface generates a very toxic gas, vinyl...

2 comments
View More
It Won't Be Moving!  Genmitsu Vacuum Table for 3018-PROVer

It Won't Be Moving! Genmitsu Vacuum Table for ...

A vacuum bed uses air pressure to push the stock down onto the bed by pumping out the air from underneath it, creating a partial vacuum. The resulting difference in air...

It Won't Be Moving! Genmitsu Vacuum Table for 3018-PROVer

Posted by SainSmart on

A vacuum bed uses air pressure to push the stock down onto the bed by pumping out the air from underneath it, creating a partial vacuum. The resulting difference in air...

View More
Genmitsu Dust shoe for 52mm Spindle Motor

Genmitsu Dust shoe for 52mm Spindle Motor

Written by Graham I am using this on my 3020-PRO MAX, It’s not so much a dust shoe for the 3020-PRO MAX, but a dust shoe for a 52mm diameter...

1 comment

Genmitsu Dust shoe for 52mm Spindle Motor

Posted by SainSmart on

Written by Graham I am using this on my 3020-PRO MAX, It’s not so much a dust shoe for the 3020-PRO MAX, but a dust shoe for a 52mm diameter...

1 comment
View More
Happy Halloween From All of Us at SainSmart!

Happy Halloween From All of Us at SainSmart!

A beloved holiday for the maker community, Halloween was where it all started for many of us! Before conventions, before cosplay as a concept, this was one of the best...

Happy Halloween From All of Us at SainSmart!

Posted by SainSmart on

A beloved holiday for the maker community, Halloween was where it all started for many of us! Before conventions, before cosplay as a concept, this was one of the best...

View More
Some thoughts and hints on setting up your Genmitsu 3020-PRO MAX

Some thoughts and hints on setting up your Genm...

By Graham Bland   I just received my SainSmart Genmitsu 3020-PRO MAX. My thanks to SainSmart for sending me one to evaluate. Any comparisons with the 3018-PROVer relate to my...

2 comments

Some thoughts and hints on setting up your Genmitsu 3020-PRO MAX

Posted by SainSmart on

By Graham Bland   I just received my SainSmart Genmitsu 3020-PRO MAX. My thanks to SainSmart for sending me one to evaluate. Any comparisons with the 3018-PROVer relate to my...

2 comments
View More