With SainSmart offline controller module, you can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.
Manual Control
The location of XYZ Axis can be adjusted manually as engraving starting point. The spindle open or close mode also can be controlled manually by this module.
Two-way Access The File
The engraving filed can be directly recognized once you put the file in the SD card. You can also connect the offline module to the computer by micro USB cable, then store the file directly.
Easy to Use
All you have to do is connect the offline module to the GRBL controller board, then you can control the CNC router with this module.
Compatible with SainSmart Genmitsu CNC Router
This offline module is perfectly compatible with SainSmart Genmitsu CNC Router 3018, 3018-Pro, 1810-Pro. (not compatible with MX-3)
Industrial Grade Design SainSmart Blue Laser Module is designed for the industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.
Excellent Heat Dissipation Equipped with large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.
Easy to Use No instructions needed, just plug it to the laser port of the driver board, then it works.
Focus Adjustable The focus of the laser lens can be adjustable according to your need. This operation can be done by spinning the laser lens.
Application The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit.
This is SainSmart new CNC complete kit for engraving DIY. It comes with necessary and basic parts to make your own engraving machine. It is simple and easy to assemble the parts.
12-36VDC input (recommend 24V), output high voltage direct current, voltage of the input voltage of about 1000 times. The 12V input can reach 50-100W power, 24 V input max can reach more than 200W, so request power supply current best in more than 10A.
A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them "ZVS circuit". Because of its big power, low heat, simple and reliable by fans are widely used in the drive spark gap tesla coil (SGTC) and Jacob, ladders, Marx generator, etc.
Very easy to use, no instructions, all of use are marked on the board
With large heat sink to ensure good heat dissipation
Input signal high-speed optocoupler isolation, guarantee not losing steps
Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
Attenuation model adjusted for all the motors can be locked when no noise
![[Replacement] Limit Switches (XY) for 3018-PROVer](http://cdn.shopify.com/s/files/1/1978/9859/products/XYLimit-switch-RPM-3018prover_300x300.jpg?v=1639981524)
![[Replacement] ER11 1/8'' Collet for 3018-PROVer](http://cdn.shopify.com/s/files/1/1978/9859/products/Collet-3018prover_300x300.jpg?v=1627295049)
![[Replacement] Clamp Set for 3018-PROVer](http://cdn.shopify.com/s/files/1/1978/9859/products/Clampset-3018prover_300x300.jpg?v=1627294818)
![[Replacement] Stepper Moter Cable & Spindle Cable for 3018-PROVer](http://cdn.shopify.com/s/files/1/1978/9859/products/steppercable-RPM-3018prover_300x300.jpg?v=1627294270)
![[Replacement] Limit Switch Cables for 3018-PROVer](http://cdn.shopify.com/s/files/1/1978/9859/products/Limit-switch-RPM-3018prover_300x300.jpg?v=1627293657)
![[Replacement] Acrylic Baffle for 3018-PROVer](http://cdn.shopify.com/s/files/1/1978/9859/products/RbafflePM-3018prover_300x300.jpg?v=1627293226)
![[Replacement] USB disk for Genmitsu 3018-PRO](http://cdn.shopify.com/s/files/1/1978/9859/products/USBdisk_300x300.jpg?v=1626415475)
![[Open Box] CNC 4-Axis Kit 6 with ST-4045 Motor Driver, USB Controller Card, Nema23 Stepper Motor and 36V Power Supply](http://cdn.shopify.com/s/files/1/1978/9859/products/01_155_1_2b2eff41-524e-4520-aa35-6d02e39ac334_300x300.jpg?v=1625794177)
![[Replacement] 4-pin Motor Wire & Spindle Motor Wire for 3018-PRO](http://cdn.shopify.com/s/files/1/1978/9859/products/WIre3018_300x300.jpg?v=1625739283)
![[Replacement] Bakelite Plate for 3018-PRO, Back-Front, Left-Right](http://cdn.shopify.com/s/files/1/1978/9859/products/BakelitePlatefor3018-PRO-BF_300x300.jpg?v=1625734249)
Log in/Join