Cut Faster and Deeper: Equip an air-assist system on your laser engraver or laser cutter to enhance cutting by blowing residual smoke away from the workpiece for increased laser power and efficiency.
Better Lens Protection: The air assist nozzle can protect your laser lens from smoke residue buildup, improving its longevity and cutting efficiency.
Clean and Smooth Finish: The air assist nozzle regulates the laser beam to be more precise and the airflow from the air pump helps cool down the heat generated, they combined to provide you a clean burn and cut finish.
Adjustable Air Pressure:Find the optimal air pressure for your different working projects and tune it to the best with this Genmitsu air pump.
The diameter of the spindle is 44mm. Perfect for most 3018 CNC Routers on the market, including Genmitsu 3018-PRO, 3018-PROVer, 1810-PRO.
DC: 24V, No Load Speed: 12000 rpm, Rated Load Speed: 10000 rpm. Up to 26dB quieter during operation. High stability running performance makes it perfect for high precision engraving.
Compared to other normal spindle motors, the Brushless Motor has a much longer service time. It is almost maintenance-free. You just need to do some dusting when necessary.
Experience a quick and easy upgrade for your 3018 CNC Router. The spindle comes with a drive board, USB cable and the Collet Holder is pre-installed already.
Affordable: With glasses, gloves and earplugs a set, it's cost-effective for you. You can get full protection during both indoor and outdoor work.
Advanced Hand Protection：These work gloves have been specially designed using cutting-edge firm grip, anti-slip Nitrile coating with cut resistance, providing ultimate protection while delivering unparalleled dexterity and control.
Ideal Eye Protection: Light yet rugged and protective. Protective wrap around design shields from harm. Protect your eyes from exposure to an unexpected chemical splash, flying debris, spray, fluid or saliva droplets.
Noise Reduction Earplugs: Protect your hearing from loud noise and high damaging decibel levels, avoiding depression and tinnitus. Designed with a comfortable shape that adjusts your ear, fits well and stays well in your ear, easy to insert.
Application: Ideal for indoor or outdoor work, general maintenance, construction, landscaping, industrial work, woodworking, metal work, and lab work.
Necessary tool: Woodworking protractors & ruler is an indispensable tool for woodworkers and mechanics for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles easily, which will bring much convenience to your work.
Easy to use: This protractor rotates a full 180 degrees for measuring any odd angles. With the square ruler you can quickly and easily measure whether the material or anything is right angle.
Durable: Made of high-quality Stainless Steel with a black anodized finish, which is moisture-proof, rust-proof and corrosion-resistant, ensures longer durability and abrasion resistance.
Widely Applications: Perfect for students, machinists, carpenters and woodworking hobbyists, vehicle maintenance and repairing, construction, drawing for draw radial lines, setting bevels and transferring angles.
Great gift for dads, men and women who work in woodworking, construction, engineering, ect.
The vacuum table is solid aluminum, which has high stability and excellent suction to help prevent warping. It is perfect for engraving thin materials or workpieces that require high precision. Works well with a properly sized vacuum pump. A perfect match Vacuum Pumpis also available.
This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your
operations. Equipped with a nylon brush to maximize vacuum suction and help act as a dust sweep with high dust
removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
You may also like the Dust Shoe
for Φ52mm spindle motor (compatible with PROVerXL 4030 & 3020-PRO MAX)
Replacement Base Bottom Cover
This Bottom Cover is made of high-quality transparent ABS and preinstalled 20mm long nylon brush. Compatible
with Genmitsu CNC Dust Shoes for 42mm and 52mm diameter spindle motors.
The 20mm Nylon Brush is perfect for shorter cutting tools, such as V bits. Avoid snags and tangles. Don’t need
to spend time reinstalling a new brush. Just replace the whole bottom cover when the brush is worn. One step
replacement.
This MDF spoilboard is redesigned with scale 1-cm grids and 24 holes to fit most sizes of clamps, which is flexible for your configuration. The size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in), it is compatible with most 3018 CNC routers on the market. (eg. Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3)
A spoilboard is a disposable workbench mounted above the router’s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
Durable Design: The collets are made of high-quality alloy spring steel material. High accuracy and it can be up to 0.0005. Durable and long lasting. Polished body to be smooth and rust resistant.
Save your time: The Collet Chuck Wrench is made of high carbon steel with anti-slip handle design. Easy to tighten and loosen the collet chuck holder to improve work efficiency.
High precision and stable performance: Extend the opportunity to use more router bits for both 1/8'' and 1/4'' shank in your CNC machine.
Wide Compatibility: Ideal tool set for most CNC milling machines in the market and DIY CNC routers, which are compatible with M Collet.
Three different collet chucks, collet clamping nuts and spanners included. Package including: 1* ER11-M 1/8" Collet, 1* ER16-M 1/4" Collet, 1* ER20-M 1/4" Collet, 1* ER11-M Collet Clamping Nut, 1* ER16-M Collet Clamping Nut, 1* ER20-M Collet Clamping Nut, 1* ER11-M Type Collet Chuck Wrench, 1* ER16-M Type Collet Chuck Wrench, 1* ER20-M Type Collet Chuck Wrench.
Control your CNC Router or Laser Engraving Machine without connecting a computer. Your CNC or Laser Engraving Machine can be placed wherever you want and run your projects untethered. (How to use it? Read)
The upgraded offline controller can jog each axis continuously with a long press of the button. You now don’t need to move the axis with small fixed increments by pressing the button repeatedly. It makes the operation easier and saves you time.
You easily toggle your spindle on/off and process the Z-Axis tool setting. You don’t need to use your project gcode on your SD card for these functions.
This upgraded offline controller has improved its compatibility with gcode. It even can recognize some of the non-standard codes, effectively preventing interruptions or misalignment when engraving.
This laser module is ideal for engraving, cutting, scribing, and drilling, it can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.. Desired patterns can be made easily on the wood or plastic by this unit. Fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules. This module is compatible with PROVerXL 4030, 3020-PRO MAX, 3018-PRO. (How to install?)
Application: Great upgrade from the standard clamps included with 6060 Aluminum Spoilboard or CNC 3040 series and other DIY CNC’s. It can be used on the MDF spoildboard that fits the size of the M6 T-slot nut (16 x 16mm).
Dimensions: 99mm length x 20mm width x 70mm height. (3.9 x 0.8 x 2.8in)
Working range: The clamp accommodates materials up to 50mm (1.97'') thick and features easy to tighten knobs for quick installation or removal of stock material.
Sturdy Quality: Constructed of High Strength 6061 Aluminum Alloy with high durability and wear resistance.
Versatility: Spring loaded and capable of exceptional clamping force, this is a perfect addition to any universal t-track system configuration or assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
With a strong pure copper motor, the vacuum pump works with high suction power and produces low noise. It has a long service life of about 1,000 hours. It can move air quickly and pulls a strong vacuum in no time.
Quick Installation, the motor holder is included. The diameter of the holder screw hole is 23mm.
Easy maintenance, no lubricant required and it will not pollute the environment.
Compatible with Genmitsu CNC Aluminum Vacuum Table perfectly. Also, it is suitable for most DIY projects or vacuum adsorption automation equipment.
Dust Baffle Included: This kit comes with two dust baffles, which keep the Y-frames on both sides clean to work properly.
High Quality: Made of high strength aluminum alloys. Strong and durable. Compared with MDF Spoilboard, the aluminum base can be used with a Coolant Mist System and will not expand.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoilboards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
This clamp can be used with a T-Slot Aluminum Spoilboard or Threaded MDF Spoilboard of Genmitsu PROVerXL 4030 CNC router kit. It provides exceptional clamping forces for your universal t-track system configurations and assemblies. This clamp system is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
Compatibility: The Dust shoe is compatible with a 69mm diameter spindle, If you are using a big size & high power spindle, like the DeWalt spindle installed on our Genmitsu PROVerXL 4030 or other CNC machines, this dust shoe will bring you a clean workspace. Equipped with Nylon Brush for strong vacuum capability. High dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving. (Not compatible with the original Φ52mm spindle.) Easy to use: Just simply put the motor into the motor hole and align the dust shoe with the spindle upwards, then fix the motor by tightening the screw. Magnet Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Quickly pop off the nylon brush to change bits with the magnet design.
This 6060 extension kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making more. Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board is available, MDF Board will also be available soon. Simple assembly with the Installation Guide located in our at the resource center.
The Endurance 10 Watt (10000 mW) laser “Invincible” module (add-on) with 445 nm wavelength for any 3D printer / CNC machine brings ultra abilities to your 3D printer or CNC machine.
Laser Optical Power Impulse Output is 10000mW ± 15%.
Has TTL (PWM) and allows different laser power output.
High beam quality.
Reliable and stable power output.
A universal upgrade for your 3D printer / CNC machine or an XY plotter.
Cut and Engrave on almost all surfaces.
Compatible with most CNC frames and boards or 3D printers. (Compatiable with 3018 CNC & LE5040 Laser Engraver)
Note: This is a reselling product, payment will be direct to Endurance Lasers LLC.
Upgrade your 3018-PRO: Upgrade with a more powerful 300-500W spindle motor and Z-axis knob with a 52mm spindle mount. (Note: this aluminum holder is not compatible with the GS775 47mm spindles such as the stock spindle and the 20K spindle for the Genmitsu 3018 router.)
High Quality: The spindle carriage is made of high-quality aluminum for better rigidity and durability. High strength and long service life.
Stable and Reliable Performance: Can hold the motor firmly to increase stability and reduce noise. Limit switches and linear bearings are pre installed.
Delicate Appearance: All Metal design, drop in upgrade ready. Matches your 3018-PRO stock colors with the black sliver plating. It is practical and ideal for Genmitsu 3018-PRO. (Not Genmitsu 3018 CNC? Please contact us for size guide.)
Detailed Assembly Guide: With the detailed and clear installation guide in the package you can exchange the spindle hold on your own.
Material: It's constructed of high strength aluminum alloy and brass for durability and wear resistance.
Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in).
Feature: The clamp accommodates material up to 1.7'' thick and the ergonomically designed 7-star knob holds the clamp firmly in position.
Versatility: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
Compatibility: This clamp is compatible with all 3018 CNC aluminum platform, not compatible with 4030 aluminum spoilboard.
Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'')
Great Stability: The flat and smooth surface can ensure the stability of the cutting material, easy to resurface.
Easy to Use: The spoilboard comes with pre-installed threaded holes. It’s easy to install and can be used with most bench clamping systems.
Compatibility: Perfectly compatible with Genmitsu 3040 extension kit for 3018-PRO & 3018-PROVer series CNC router. Increase rigidity and expand your mounting options.
Application: Usually used when cutting or carving wooden materials. The spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
High Quality: Made of high-strength aluminum alloys. Stable, strong, and durable.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoil boards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity & expand your mounting options: The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
Application: Combine your Original Aluminum Profile with the one that comes from this kit, and easily extend your 3018 Aluminum Spoilboard to 3040 Aluminum HDF Spoilboard. (Not Genmitsu 3018 CNC? Please contact us before buying.)
Log in/Join