The Genmitsu PROVerXL 4030 Benchtop CNC machine is a new class of easy to assemble and ready to go kits. It's great for an endless variety of cutting, drilling, and carving operations on a variety of materials including wood, MDF, plastics, foams, vinyl, and aluminum. 
Take your creativity to the next level working with REAL materials and the Genmitsu PROverXL 4030 Desktop CNC. 

6060 Extension Kit is available now.

• Please do not update the firmware, it will make the control board operate incorrectly. 
• This product is excluded from all promotions and discount codes.

3-Month Carveco Maker Subscription Is Included (a $45 Value). Subscribe newsletter to receive the link.

• The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
• The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for an immediate shutdown of your machine.
• Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.
• Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

3-Month Carveco Maker Subscription Is Included (a $45 Value) ☛ Subscribe to receive

Get started with industry-leading CAM design software with a free 3-month  subscription.  Design V-Carve paths and 3D Engraving right out of the box.

Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle no need to modify G-code to ramp up to full speed and also supports the Genmitsu 3018 PRO Laser.

V2 CNC Control Board

• GRBL 1.1F
• Frosted Clear ABS Enclosure
• Upgraded Drivers reduce heat and improved spindle power performance.
• Short Circuit Protection with Fault Indicator LED.
• Improved USB Port - Stronger than before.
• The new component layout provides higher stability performance.

Controller Software: The Genmitsu 3018-PRO uses Grbl, high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck. Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files.

Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

☛ Join SainSmart Genmitsu CNC Router Facebook Group.

3-Month Carveco Maker Subscription Is Included (a $45 Value) 

Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router

Compatible With Mach3: Mach3 is professional software that can turn a PC into a CNC machine controller. 3018-PROVer Mach3 is the only budget-friendly and home CNC alternative to high-end industrial machines that allows you to learn Mach3 software and grow your CNC skills. 

Semi-Assembled: It is mostly pre-assembled and no fuss with basic setup taking less than 15 minutes out of the box. Upgraded with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

Auto Tool Zero: With one mouse click, 3018-PROVer Mach3 will automatically return to a predefined position, allowing you to easily change and calibrate your tools.

Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, 3018-PROVer Mach3 can be used on a wide range of projects and materials. The open design with an effective engraving area of 260 x 155 x 35mm (10.2 x 6.1 x 1.4'') allows you to work on even larger pieces with fewer limits.

High Efficiency Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.

Applicable Materials Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.

Large Working Area This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.

Excellent 5.5w Laser Module The laser module adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Software The LE5040 uses LaserGrbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.

Perfect compatible system Use LaserGRBL or Light.Burn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS and Linux.

*Join SainSmart Genmitsu Facebook Group.

3-Month Carveco Maker Subscription Is Included (a $45 Value)

Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.

Compact & Affordable

Our most affordable CNC Router Kit, the 1810-PRO boasts the same outstanding performance as the 3018, in a compact and affordable package. With an effective engraving area of 180 x 100 x 45 mm (7.1 x 3.9 x 1.8”), the Genmitsu can accommodate relatively small projects.

Integrated

With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.

Software

The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.

Versatile

Capable of cutting all types of plastics, woods, acrylics, PVCs, soft aluminum, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

Simple Assembly

Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise.

*Tips: 20% off Blue Laser Module when purchasing with CNC Router. (Code automatically applied at the checkout page) Add the Laser Module and Router Bits to the cart now.

*Join SainSmart Genmitsu CNC Router Facebook Group.

Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This module is only compatible with 3018-MX3/3018-PROVer, but not compatible with 1810-PRO/3018/3018-PRO.

Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.

Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.

Excellent Heat Dissipation: Equipped with a large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.

Industrial Grade Design: It is designed for industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

YOU MAY ALSO LIKE: Laser Module for Genmitsu 3018-PRO

Industrial Grade Design SainSmart Blue Laser Module is designed for the industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Excellent Heat Dissipation Equipped with large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.

Easy to Use No instructions needed, just plug it to the laser port of the driver board, then it works.

Focus Adjustable The focus of the laser lens can be adjustable according to your need. This operation can be done by spinning the laser lens.

Application The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit.

You May Also Like：Laser module kit for 3018-PROVer, LE5040

- Included Hardware (over $450 value) 
✔ Genmitsu CNC Router 3018-PRO ($270 value)

✔ Genmitsu Offline Controller ($25 value)

✔ 5.5W Blue Laser Module ($150 value)

- Included Software ($85 value) 

✔ 3-Month Carveco Maker Subscription ($45 Value)

✔ LightBurn GCode License Key ($40 value)

This is the latest version of CNC Router 3018-PRO, equipped with an all-new design controller board that provides better heat dissipation. Our new power adapter has been redesigned, with CE, FCC & PSE certifications, that ensure complete protection for you and your machines. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

New Version Genmitsu CNC Router PRO is an upgraded version of Genmitsu CNC Router. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for better stability.

Integrated With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.

Software The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.

Versatile Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

Simple Assembly Assembly instructions are provided, but if you get stuck, check out the SainSmart Resource Center or contact us with any questions that arise.

★ Join SainSmart Genmitsu CNC Router Facebook Group.

- Included Hardware (over $533 value) 
✔ Genmitsu CNC Router 3018-PROVer ($349 value)

✔ Genmitsu Offline Controller ($25 value)

✔ Blue-Violet Light Fixed Focus Laser Module ($159 value)

- Included Software ($85 value) 

✔ 3-Month Carveco Maker Subscription ($45 Value)

✔ LightBurn GCode License Key ($40 value)

• The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box. Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
• Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for the immediate shutdown of your machine.
• Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.
• *Join SainSmart Genmitsu CNC Router Facebook Group.

This Special Bundle Kit Includes:

• Genmitsu LE5040 CNC Laser Engraver Machine($349 value)
• LightBurn GCode License Key($40 value)

High Efficiency

Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.

Applicable Materials

Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.

Large Working Area

This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.

Excellent 5.5w Laser Module

The laser module adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Software

The LE5040 uses LaserGrbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.

*Join SainSmart Genmitsu Facebook Group.

3-Month Carveco Maker Subscription Is Included (a $45 Value) ☛ Subscribe to receive

Get started with industry-leading CAM design software with a free 3-month  subscription.  Design V-Carve paths and 3D Engraving right out of the box.

Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle no need to modify G-code to ramp up to full speed and also supports the Genmitsu 3018 PRO Laser.

V2 CNC Control Board

• GRBL 1.1F
• Frosted Clear ABS Enclosure
• Upgraded Drivers reduce heat and improved spindle power performance.
• Short Circuit Protection with Fault Indicator LED.
• Improved USB Port - Stronger than before.
• The new component layout provides higher stability performance.

Controller Software: The Genmitsu 3018-PRO uses Grbl, high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck. Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files.

Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

3-Month Carveco Maker Subscription Is Included (a $45 Value)

Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.

Compatible With MACH3

MACH3 is professional software that can turn a PC into a CNC machine controller. Genmitsu 3018-MX3 is the only budget-friendly and home CNC alternative to high-end industrial machines that allows you to learn MACH3 software and grow your CNC skills 

(MX3 also compatible with DrufelCNC, a free software. You can also switch to our PROVer controller board if you want to use GRBL software with MX3)

Versatile
With its powerful 9000 RPM spindle and sturdy frame, MX3 can easily carve through wood, plastic, PVBs, PCBs, acrylics, and soft aluminum. The open design with an effective engraving area of 260 x 155 x 35mm(10.2 x 6.1 x 1.4”) allows you to work on even larger pieces with less limits.

Safety-Driven Design
MX3 features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. Each axis is equipped with a limit/home switch that stops the tool spindle from leaving the engraving area.

Auto Tool Zero
With one mouse click, MX3 will automatically return to a predefined position, allowing you to easily change and calibrate your tools - a feature you will not find in a generic 3018 machine.

Laser Engraving Support
MX3 supports laser engraving as well! Simply replace the spindle with a laser module(not included). Take your craft work to another level with our 2.5W or 5.5W laser module.

Fun Assembly Experience
The assembly process is guided with our manual and Youtube videos. Save money buying a DIY kit and have fun putting the machine together.

Limitless Possibilities
MX3 is capable of crafting a wide range of commercial-grade products at an affordable cost, allowing beginners to unleash their creativity using professional CNC software. Our customers have started Etsy business with 3018-MX3 by making cool personalized items and art crafts.

• PCB Milling
• Woodworking - customized cutting board, signs, dice box, phone stand etc.
• Leather engraving, board game accessories
• Personalized gifts

Community Support
We invite you to explore CNC machining with us.  Find tutorials, how-to guides and project ideas in our online resource center. Join the largest desktop CNC community - Genmitsu Facebook group for support, tips, upgrade ideas, and design inspirations.

This Special Bundle Kit Includes

• Genmitsu CNC Router 3018-PRO ($270 value)
• 5.5W Blue Laser Module ($150 value)
• Genmitsu Offline Controller ($25 value)
• LightBurn GCode License Key($40 value)
• Nano Blue Router Bits Essential Kit($57 value)
• 3-Month Carveco Maker Subscription ($45 Value)

This is the latest version of CNC Router 3018-PRO, equipped with an all-new design controller board that provides better heat dissipation. Our new power adapter has been redesigned, with CE, FCC & PSE certifications, that ensures complete protection for you and your machines. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

3-Month Carveco Maker Subscription Is Included (a $45 Value)

Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.

New Version

Genmitsu CNC Router PRO is an upgraded version of Genmitsu CNC Router. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.

Integrated

With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.

Software

The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.

Versatile

Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

Simple Assembly

Assembly instructions are provided, but if you get stuck, check out the SainSmart Resource Center or contact us with any questions that arise.

*Join SainSmart Genmitsu CNC Router Facebook Group.

*Final Sale, no exchange or return. 6-Month Warranty.  

High Efficiency

Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.

Applicable Materials

Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.

Large Working Area

This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.

Excellent 5.5w Laser Module

The laser module adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Software

The LE5040 uses LaserGrbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.

*Join SainSmart Genmitsu Facebook Group.