CNC & Engraving
Tools & Instruments
This essential kit includes 3 boxes total of 30 CNC router bits and 1 box ER11 spring collet set, satisfying your different CNC needs.
Nano Blue Coat All bits are coated by Nano Blue. This is a new craft at the market. With this new technology, it provides higher hardness and better rustproof than the router bits coat with titanium.
Improve Efficiency Made of hard steel and featured with high hardness, strength, and wear resistance. This makes your job easier and improves work efficiency.
Application It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood. Read more about our millling bit shopping guide.
$64.99$57.99 SAVE $7.00
High Quality -- The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
Applicable Materials -- Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility --The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$34.99$33.24 SAVE $1.75
- Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs. (0.8-3.0mm Set)
- Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm), 10Pcs. (1.5-3.175mm Set)
- Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing. Suitable for milling and cutting(PVC, PCB, acrylic)
$85.99$79.99 SAVE $6.00
4pcs Tapered Ball Nose End Mills
Radius: R0.25, R0.5, R0.75, R1.0mm; Cutting Length: 15mm
4pcs Single Flute Spiral End Mills
Cutting Diameter: 2, 2, 3.1, 3.1mm ; Cutting Length: 8, 8, 12, 22mm 2pcs Flat Bottom Tungsten Carbide Steel Alloy Engraving Bits Cutting Diameter: 0.1, 0.2mm; Angle: 30°
Applicable Materials: Widely used in various materials including plastics, acrylic, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility: Genmitsu EM10A micro-cutting diameter end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.$39.99
Buy the CARVE MORE Bundle at an attractive price. This bundle includes:
- 10PCS Nano Blue Coat 20 Degree Engraving Bits ($14.99 value)
- 10PCS 1/8" Shank Micro-Cutting Diameter End Mills Set, EM10-W01($39.99 value)
- GS-775M 24V 20,000 RPM Spindle with Collet Holder Installed ($29.99 value)
- 7Pcs ER11 Collet Set ($11.99 value)
Widely used in various materials including plastics, aluminum, circuit board, wood, acrylics, carbon fiber, chipboard, MDF, PCB, as well as other precision parts processing.
7Pcs ER11 Collet Set
Gripping Range: 1mm to 7mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm). Perfect for CNC milling lathe tool and work-holding engraving machine.
GS-775M Spindle with Collet Holder Installed
DC: 24V. Speed: 20000/min. Pre-installed motor noise suppression PCB provides enhanced performance. Experience a quick and easy upgrade for your Genmitsu Desktop CNC. It's compatible with Genmitsu 3018 Series CNC router.$99.99
High Durability & Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more.
Much Stronger, Lasts Longer: Specially designed for General Purpose, comes with 10 PCS in different types, designed to meet your needs. Shank diameter: 1/4''(6.35mm)
Applicable Materials: Suitable for Aluminum, Brass, Bronze, Copper & Titanium, Aluminum Composite Material (ACM), Composite, Fiberglass, Graphite, MDF/HDF, Plastic, PVC & Acrylic, Plexiglas, Sign Foam, Sign Board & HDU, Wood, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling.
Wide Compatibility: Genmitsu MC10A are compatible with most desktop CNC machines, such as the Genmitsu PROVerXL 4030, Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$235.99$169.00 SAVE $66.99