eBox Lite is safety designed and equipped with an enhanced heating mechanism using a Polyimide heater with a curved metal plate that has high thermal conductivity for fast heating and an air circulation fan for precise heat distribution and consistent temperature inside the dryer ensuring dry the filament effectively and quietly.

With a maximum filament capacity measuring ⌀200mm × 73mm(H), the eBox Lite is compatible with filaments with different spool weights and sizes. 500g, 1KG; 1.75mm, 2.85mm, 3mm

Comprehensive Vacuum Storage Kit: The state of the filament you use is the key to the quality of your prints, the eVacuum 3D Printer Filament Storage Kit allows you to keep your filaments in tip-top shape with ease.

Protects from Moisture: Durable vacuum compression bags, heavy-duty valve, and double seal zipper for airtight protection.

Easy Monitoring: Clear vacuum bags, together with cobalt-free humidity indicator cards enables you to have a quick view of the humidity level of your filaments without opening the bags.

The humidity indicator cards can be reused after drying with an oven or hair dryer.

Bag Size: 30cm × 40cm (11.81" × 15.75"); 40cm×40cm (15.75”×15.75”); It can be adapted to 0.5KG/0.75KG/1KG package of 1.75mm/2.85mm/3mm filaments.

Drop In Auto Leveling Upgrade: CR-Touch is the latest auto leveling upgrade kit developed by Creality. Featuring Precision, stability and reduced cost, the CR-Touch is a great option for leveling kit.

Durable Metal Push-Pin: A plastic push-pin tends to degrade and requires replacement from time to time, the new CR-Touch uses a metal push-pin, allowing for longer service time.

Easy Calibration: Instead of leveling the bed manually yourself, the CR-Touch gathers the bed deviation data by touching multiple points in the bed and compensating for them accordingly,allowing for hassle-free bed leveling.

Wide Compatibility: With 3 different types of bracket, this CR-Touch bed leveling upgrade kit is compatible with Creality Ender 3 V2, Ender 3, Ender 3 Pro, Ender 3S, Ender 3 MAX, Ender 5, Ender 5 Pro and CR-10. (Note: Only compatible with printers with 32-Bit V4.2.2/V4.2.7 Board). In addition, the CR-Touch works flawlessly on any bed surface regardless of surface type or material.

Effortless Installation and Upgrade: The new CR-Touch upgrade kit shares the same firmware with the BL-Touch, corresponding firmware can be downloaded from Creality Support Center.

Plug and Play WiFi Printing & Remote Control Solution: Creality Smart Kit includes a WiFi box and a camera, providing you a simple & budget remote printing and monitoring solution for your Creality 3D Printer. Compared with other open source solutions, it is easier to set up and it costs less.

Real-time Monitoring: With a wide angled high definition camera, you can keep an eye on your printer at any place and from anywhere.

Smooth Workflow: No more running back and forth your computer and printer. With the Creality WiFi Box, slicing and printing can be done wirelessly, it also allows you to control multiple printers in one place, making your workflow smoother.

Stable & High-speed Connection: Equipped with a high performance and well-tested SOC, the Smart Kit allows you to control and monitor your printer in real time.

Creality Cloud Community: In Creality Cloud, you can find abundant 3d printing models to print with, share your finished projects with others, get help troubleshooting your printing issues and so on. This energetic and creative community can bring you more fun with 3d printing.

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.

Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size.

Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.

Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed.

Compatibility & Application: The laser module is compatible with Ender-3, Ender-3 Pro, Ender-3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo.

Ultra Accurate: ±0.1° Accuracy at 0° and 90°; ±0.2° at the rest angles. Resolution: 0.05°. Measuring Range: 90°x4. We know your pursuit of high precision.

Easy to Read: The VA display provides higher brightness, better color reproduction, and better viewing angles than the traditional LCD. And there is a hold function to freeze the display for easier reading. The readings invert when the unit is inverted.

V Groove Strong Magnetic Base: The base of the digital level is magnetic for firmly attaching to metallic surfaces, such as saw blades, router table, the print bed of a 3D printer, and many more. Besides, it features V groove edges to simplify pipe measurements.

Absolute and Relative Measurement: In addition to the absolute measuring mode, the digital angle gauge also has a relative measuring mode for measuring the relative angle between two measured surfaces quickly.

4 Measuring Units: There are 4 measuring units ° degrees, %, mm/m, IN/FT for easier unit conversion.

Direct Drive Extruder: BIQU H2 is a light-weight and compact direct drive extruder upgrade kit that allows for smooth and precise extrusion and low retraction, which combined deliver better print quality. It is also perfect for flexible materials like TPU and TPE.

Light Weight: BIQU H2 Extruder, with only 219 grams, overcomes the common drawback of other direct drive extruders. enabling you to push the printing speed higher without issues.

All-in-one Design: BIQU H2 combines the hotend and extruder together, further shortening the filament path between the heater block and extruder. This feature, along with the enhanced grip with the dual gear direct drive, printing flexible filaments with it are a breeze.

Wide Compatibility: BIQU H2 Extruder has a unique mounting system, you can install it on the most 3d printer on the market. (Print the compatible mount and update the appropriate firmware. Mounts for popular 3d printers can be downloaded here: (Includes BIQU B1, Ender 3(V2), Ender 6, CR-10S Pro, CR-10 V2/V3, Anycubic Mega X, Artillery X1 Genius and more.)

Easy Installation and Upgrades: This SKR E3 Mini V2.0 Board + TFT35 E3 V3.0 Screen combo makes installation and upgrades easier. No firmware modifications are required and with built-in support for upgrades like BL-Touch, filament detection, power-off detection, automatic shutdown, this combo just makes your 3d printing life easier.

Quiet: The TMC2209 stepper motor drivers, with the StealthChop feature can get rid of the annoying noise from the stepper motors, allowing for quieter printing.

Dual printing methods: You can now print your projects via SD Card and USB Stick.

Touchscreen functionality and Dual UI: Responsive 3.5“ touchscreen with bright and sharp color. Add support for the latest marlin mode and BIQU touch mode to your printers, enabling you to get the best of both worlds.

High Performance: Both the board and the screen use a 32-bit board that enables your printer to be more responsive and accurate, making your printer more future-proof by supporting the latest firmware and upcoming features.

Authentic ANTCLABS BL-Touch V3.1: One of the most accurate and reliable leveling sensors available.

Make 3D Printing Easier: A properly leveled bed is fundamental to decent quality prints. BL-Touch is an auto leveling sensor for your 3D Printers, it makes it possible for you to calibrate your printers with ease, getting you off to a great start.

Wide Compatibility: As the most popular bed leveling solution on the market, the ANTCLABS BL-Touch has great compatibility with a wide variety of controller boards. You can use it on the SKR Mni Board and any printer with stock BL-Touch interface.

The BL-Touch Kit comes with an 80 cm extension cable, which adds up to a total length of approximately 95cm, please confirm whether it will fit your printer before purchase.

Note: This kit does not comes with BL-Touch Bracket, you need to buy or print it separately.

Ultra Accurate: ±0.1° Accuracy at 0° and 90°; ±0.2° at the rest angles. Resolution: 0.05°. Measuring Range: 90°x4. We know your pursuit of high precision.

Easy to Read: The VA display provides higher brightness, better color reproduction, and better viewing angles than the traditional LCD. And there is a hold function to freeze the display for easier reading. The readings invert when the unit is inverted.

V Groove Strong Magnetic Base: The base of the digital level is magnetic for firmly attaching to metallic surfaces, such as saw blades, router table, the print bed of a 3D printer, and many more. Besides, it features V groove edges to simplify pipe measurements.

Absolute and Relative Measurement: In addition to the absolute measuring mode, the digital angle gauge also has a relative measuring mode for measuring the relative angle between two measured surfaces quickly.

4 Measuring Units: There are 4 measuring units ° degrees, %, mm/m, IN/FT for easier unit conversion.

• Opens up more filament options to your 3D Printers, allows you to print more demanding materials like Nylon, TPU and Carbon-filled abrasive filaments with ease.
• Unique dual feeding mechanism for reducing issues like stringing, slipping and clogging, delivering a higher print quality.
• Adjustable tensioner allows user to tweak the extruder to the proper tension according to the materials they use.
• Built-in lever enable users to release filament fast and easy.
• Compatible with Creality Ender 3, Ender 3 Pro, Ender 5, Ender 5 Pro,CR-10, CR-10S.

• With an all-metal hot end, you’re free to print filament that has high temperature requirement, such as Nylon filament, it also helps you printing flex filament with ease, adding more possibility to your 3D Printing project.
• An all-metal hot end can greatly reduce the risk of clogging and uneven extrusion,delivers you consistent output.
• It frees you from replacing the PTFE tube frequently, requiring less maintenance.
• Specially designed cooling block allows for faster heat dissipation.
• Compatible with CR-10, CR-10S, Ender-3, Ender-3 Pro etc; The hotend is pre-assembled for easy installation.

• It gives more tension to the extruder and allows for a better filament guiding, prevents the filament from getting stuck, making sure a smooth flex filament printing process and improve the overall printing performance.
• Provides greater stability and durability over your stock 3D Printer.
• Perfect replacement for Creality 3D Printers, such as Ender 3 (Pro), Ender 5, CR-10 Mini, CR-10S, and CR-10 Plus etc.
• Filament Compatibility: 1.75 mm Filament
• Made of quality aluminum & Easy to install.

• It gives more tension to the extruder and allows for a better filament guiding, prevents the filament from getting stuck, making sure a smooth flex filament printing process and improve the overall printing performance.
• Provides greater stability and durability over your stock 3D Printer.
• Perfect replacement for Creality 3D Printers, such as Ender 3 (Pro), Ender 5, CR-10 Mini, CR-10S, and CR-10 Plus etc.
• Filament Compatibility: 1.75 mm Filament
• Made of quality aluminum & Easy to install.

• Nozzle diameter: 0.4 mm
• Filament Compatibility: 1.75 mm filament
• Overall Hardness: 50 HRC; Surface Hardness: 55-60 HRC
• The nozzle is made of carburising hardening steels, which delivers excellent wear-resistance and heat-resistance, prolongs the nozzle lifespan while handling abrasive filaments.
• Suitable for abrasive materials with high temperature requirement like Carbon Fiber Filled Nylon Filament.

• Package includes 5 x 0.2 mm nozzle, 5 x 0.4 mm nozzle, 1 x 0.2 mm nozzle cleaning needle, 1 x 0.4 mm nozzle cleaning needle, 1 x tweezer
• Brass Nozzles are softer than hardened steel nozzles and rubber tip nozzles, which means they can wear down easily and require frequent replacement. SainSmart Nozzle Maintenance Kit provides 5 x 0.2 mm nozzle , 5 x 0.4 mm nozzle, delivering you consistently great print with high surface quality.
• A common reason for a clogged extruder can be cold material glued inside the extruder, which prevents smooth extruding, this issue can be easily solved with the cleaning needles come with the maintenance kit.
• The tweezers in the kit is made of high quality stainless steel, it is useful for removing material residue in the nozzle and also fit for printer part support removal.
• Keeping this nozzle maintenance kit handy can be useful fort printing issue diagnosis.

• Material: Aluminum Alloy
• This belt tensioner keeps your machine printing at its best.
• Easily adjust belt tension to maintain accuracy performance.
• Pre-assembled, easy to install.
• Suitable for Creality Suitable for Ender-3, CR-10, Ender-5, Ender-5 Plus.

• Upgraded Anti-Slip Mechanism for Easy Leveling
• Material: Aluminum
• CNC machined one-piece aluminum leveling kit provides solid build quality
• The Leveling Kit can be disassembled into four parts, making it easier to clean
• Compatible with SainSmart Kumitsu KL9

• Upgraded Anti-Slip Mechanism for Easy Leveling
• Made with quality aluminum alloy, provides great durability
• If fast resin switching during printing is needed, then using this spare build plate can boost your printing efficiency.
• Compatible with SainSmart Kumitsu KL9
• Easy replacement

• FPC (Flexible Printed Circuit) has greater flexibility compared to traditional rigid circuit boards, it can greatly reduce space and weight needed for small electronics.
• Length: 20 cm
• Compatible with SainSmart Kumitsu KL9 LCD Screen.

• 8.9 Inch 2K LCD screen delivers highly detailed parts
• High screen transmittance
• Prolonged life span
• Compatible with SainSmart Kumitsu KL9 & other 8.9 inch resin printer
• Easy to replace

• A thumb screw is a screw that is designed to be tightened and loosened by hand without using any external drive.
• The head of the thumb screw is knurled to provide extra grip, which enables you to when tightening and loosening it by hand.
• With this thumb screw set, replacing resin vat requires no extra tooling, easier and faster.
• Material: Aluminium Alloy; Length: Approx. 4.3cm (1.7 inch)
• This small upgrade is available to all Kumitsu KL9. You can simple install it on your own printer.

• Tired of releveling your 3d printer every time? Try this silicone hot bed mount, it can reduce vibration and keep the bed stable, once it is in place, leveling is no longer a pain.
• Whether you are a user of BL-touch or other mesh leveling method, these little mounts can make leveling much easier than ever.
• Length: 18mm; Two Colors Options: Black and Orange
• Heat resistant
• Compatible with most 3D Printer in the market, such as the Creality Ender Series, CR-10 Series, etc.

▶ Improve your print quality with the most powerful 3D printing software available. Simplify3D provides complete control over your print settings, making it easier than ever to create high-quality 3D prints. Start up quickly with pre-configured settings optimized for your 3D printer, review a simulation of your build sequence in the Preview Mode and begin your 3D print with confidence. Total control means amazing 3D prints!

▶ The software is cross-platform and can be installed on Windows, Mac OS X, or Linux systems

▶ System Requirements: Intel Pentium 4 or higher processor, 2GB or more of RAM. Windows XP or greater, Mac OS X 10.6 or greater, Ubuntu Linux 12.10 or greater. OpenGL 2.0 capable system. An internet connection is required for the installation and continued use of the software.

▶ The software is viewable in English, German, Spanish, Japanese, French, or Italian.

▶ The product is an electronic download that is emailed after your purchase via Simplify3D official.

Tips: License purchase is non-refundable. The license key will be emailed to you within 12 hours.