The Pro32 is a staple tool for the hobbyist, tinkerer, or electrical engineer. Featuring a sleek body, complete with temperature adjustment buttons and an OLED display, the Pro32 feels good in the hand and offers a wide temperature range for operation. Its internal heating element warms up to operating temperature in just 12 seconds!
With the help of dual temperature sensors, the internal heating element reaches its operating temperature extremely fast—just 12 seconds! The tip temperature can be set between 212° F and 752° F (100° C to 400° C) using the adjustment buttons and OLED display.
New Power Supply Design
The Pro32 features an integrated DC5525 12-24V connection. Its anti-static design isolates the temperature sensors from extraneous surges.
Tough & Portable
The sleek, slim design is comprised of an SAE 304 stainless steel core, housed inside a polycarbonate shell with an easy-to-read OLED display.
Smart & Safe
The integrated STM32 processor chip automatically regulates the Pro32’s “sleep mode”, “standby”, and “operating mode”, ensuring the safety of the user.
DS212 is a 2-channel digital oscilloscope. It is in a new design - two gear for controlling, very convenient for testing. It supports USB flash disk storage and USB charging. It is widely applicable in the academic experiment, electronic maintenance, electronic engineering tasks, etc.
New design - two gear for controlling, very convenient for testing.
Pocket-size and lightweight.
Chargeable lithium battery, 4 hours' working duration.
DSO213 is the latest oscilloscope in the family of SainSmart DSO oscilloscope. Compared with DSO203, DSO213 upgrades its analog bandwidth to 15MHz (DSO203 is 8MHz) and max sample rate to 100MSa/s (DSO203 is 72MSa/s)
Equipped with a 3 inch 400x240 color display, it presents any measured AC current, including sine, square, sawtooth, and triangle waveforms.
Simple to Use
Operation is simple and easy, just like play a smartphone.
Its small form factor conveniently fits inside any pocket so it’s always ready when you need it.
The built-in 8 MB flash storage makes saving and transferring waveform images easier than ever.
Micsig high voltage differential probes DP series are designed for the measurement for high voltage differential signal, to meet the demand for floating measurement. It has 50MHz and 100MHz two models, and has two kinds of different attenuation ranges: 500X, indicate the maximum test voltage is 1300V; 50X presents maximum test voltage is 130V.
SainSmart 599B is a replacement solder tip cleaning wire sponge. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. It is a good cleaning sponge for SainSmart Pro32 soldering iron!
Basic Home Tool Kit: This multifunction handle can be used by both ends to fit for different usages. Various blades and bits meet the needs of different work scenes. This powerful tool kit is perfect for DIY projects and repair electronic devices and tasks.
Multifunction Handle: It can be assembled with bits as a screwdriver, and also with engraving blades and mini wrenches. While connected with the extra bit connector and the drill bits, the handle can become a drilling tool.
Useful: An extension bar is stored inside the body of the multifunction handle, which can be assembled to lengthen the handle for places hard to reach.
Ergonomic Design: Designed base on ergonomics, gives you an extraordinary hands feel, even a long time electronic project, your hands won’t feel tired.
Portable Bag: This portable tool kit comes with a well-organized bag for storing the rich accessories, it's easy to carry or put in your trunk.
TS80P is the upgrade version of TS80 Portable Soldering Iron. It is powered by USB Type-C interface and PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with the PD2.0 (12V 3A)/QC3.0 (9V 2A) protocol.
The output power of TS80P has been increased from 18W to 36W max. It can heats up in only 8s from room temperature to 572℉(300 ℃), which is 10s faster than TS80. It’s equipped with an OLED screen, you can monitor the status of the soldering iron at any time.
Smart & Safe
With a built-in STM32 chip, TS80P can smartly control the rise and fall of tip temperature, and features sleep, automatic power-off, safety protection and other modes. The code application layer is open source; you can develop firmware for the soldering iron freely as needed.
TS80P features a brand new easy-push tip fastener, which provides a best holding experience and an easy push to loosen the soldering tip for quick replacement.
TS80P has a simple, lightweight body that fits comfortably in the palm of your hand. It’s completely portable and suit your pockets. You can take it anywhere you want and use it while powered by a power bank.
OWON witnesses the new-born USB oscilloscope working on PC - OWON VDS series oscilloscope in the new era. Especially for engineers. OWON VDS PC oscilloscope attracts more eyesight from the market upon with its ultra-thin body design - only 18mm of body depth, which is much portable, and its USB powering facilitates mobile tests under powerless conditions to the largest degree.
Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 10M record length
Friendly UI : FFT, or X-Y, and waveform 2 views displayed, on the same screen
Multi-trigger option : edge, video, slope, pulse, and alternate
USB isolation - less signal inference, more PC protection. USB bus powering, and LAN remote control (optional)