• Comes with the free unified firmware preconfigured for Ender-3.
• With the all-new V 1.1.5 mainboard, the printer is working nearly silent from even just a few meters away.
• Features thermal runaway protection function effectively avoids the heating problem.
• It can be worked with E/Z/Y/X drive axle.
• Voltage: Support 24V input voltage.

• Rapid UV curing ensures the strength of printing parts and lowers the shrinkage rate. This resin provides you both high toughness and hardness prints.
• The general-purpose resin is compatible with most LCD printers on the market that use 405nm wavelength light. Including EPAX X1, Anycubic Photon, Photon2, WanHao D7, and other LCD printers.
• SainSmart Resin is easy to detach after forming. Low viscosity makes it simple to clean your 3D printer.
• Its performance is stable under room temperature condition and safe to store. Also, with little odor, buy with confidence.
• Great for making functional parts that have high precision and clear details. For better printing quality, we recommend using the LCD light.

• Rapid UV curing ensures the strength of printing parts and lowers the shrinkage rate. This resin provides you both high toughness and hardness prints.
• The general-purpose resin is compatible with most LCD printers on the market that use 405nm wavelength light. Including EPAX X1, Anycubic Photon, Photon2, WanHao D7, and other LCD printers.
• SainSmart Resin is easy to detach after forming. Low viscosity makes it simple to clean your 3D printer.
• Its performance is stable under room temperature condition and safe to store. Also, with little odor, buy with confidence.
• Great for making functional parts that have high precision and clear details. For better printing quality, we recommend using the LCD light.

• This sensor can precisely measure the tilt of your print surface, helping to improve the printing precision of your 3D printer.
• Compatible with Creality3D CR-10S, CR-10 mini, CR-10 Standard, CR-10 Plus 3D Printer.
• A good upgraded ABL auto leveling sensor for Creality3D 3D Printer.
• Easy to install, do not need to soldering at all.

Silky Shiny Color

Sainsmart's PRO3 series Silk-PLA filament guarantee high printing quality while giving you a different visual experience.

No Jamming at All

Supported by an all-new technology called layer by layer, PRO-3 is featured with 100% tangle-free. This ensures the filament printed extremely smooth and no more extruder become clogged again.

Laser Precision

Inspected by laser, PRO-3 ensures each inch of filament is precisely engineered to +/-0.02mm error rate. Consistent round shape avoids unexpected interruption in printing.

Smart Indicator

A smart length indicator is present on the surface of the clear PC spool for your convenience to know the length of your remaining filament.

Glossy and Pliable

Models printed using this PLA result in bright colors with a shiny gloss. Models result in high pliability while keep high tensile strength.

• TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
• Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart x Creality, and other RepRap printers.
• With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp.
• Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!
• USA orders will be fulfilled by Amazon, fast and efficient.

Thermoplastic polyurethane (TPU) is a high strength flexible material. TPU belongs to the TPE class of thermoplastics

• Coral is the color of the year 2019, which can satisfy your lattest designs.
• Specially formulated plastic with increased amount of flexibility, with rigid structure.
• Resistant to oil, grease and abrasions.
• Weight: 1 KG (approximately 2.20 lbs)
• Diameter: 1.75mm (+/- 0.05mm)
• Shore Hardness: 90A.

Eco-Friendly Raw Material

Made from natural renewable resource, which is a mixture of recycled wood with PLA, so the filament is 100% biodegradable & non-toxic.

Wood-like Prints

Models printed using this wood PLA lead to a wood-look color with the tactile feel of wood. The PRO-3 3D wood PLA filament is widely used for toys, decoration, house equipment, etc. Prints can be beautiful when you use PRO-3 wood PLA. This filament will make you feel like a true artist.

Laser Precision

Inspected by laser, PRO-3 ensures each inch of filament is precisely engineered to +/-0.02mm error rate. Consistent round shape avoids unexpected interruption in printing.

Smart Indicator

A smart length indicator is present on the surface of the clear PC spool for your convenience to know the length of your remaining filament.

Vacuum Sealed

Every spool of filament is carefully vacuum packaged with desiccant to maintain a low level of moisture content. Wood PLA is not 100% tangle-free due to its special material, but it is relatively layered in order, buy with confidence.

Are you tired of tangles spools ruining hours of printing? Are you looking for an all-around filament to get you started with your first 3D prints? We are excited to tell you that SainSmart PRO-3 series PLA filament can resolve all your concerns.

No Jamming at All

Supported by an all-new technology called layer by layer, PRO-3 is featured with 100% tangle-free. This ensures the filament printed extremely smooth and no more extruder become clogged again.

Laser Precision

Inspected by laser, PRO-3 ensures each inch of filament is precisely engineered to +/-0.02mm error rate. Consistent round shape avoids unexpected interruption in printing.

Smart Indicator

A smart length indicator is present on the surface of the clear PC spool for your convenience to know the length of your remaining filament.

Eco-Friendly

Made from the natural renewable resource, the filament is 100% biodegradable & non-toxic.

Glossy and Pliable

Models printed using this PLA result in bright colors with a shiny gloss. Models result in high pliability while keeping high tensile strength.

Are you tired of tangles spools ruining hours of printing? Are you looking for an all-around filament to get you started with your first 3D prints? We are excited to tell you that SainSmart PRO-3 series PETG filament can resolve all your concerns.

No Jamming at All

Supported by an all-new technology called layer by layer, PRO-3 is featured with 100% tangle-free. This ensures the filament printed extremely smooth and no more extruder become clogged again.

Laser Precision

Inspected by laser, PRO-3 ensures each inch of filament is precisely engineered to +/-0.02mm error rate. Consistent round shape avoids unexpected interruption in printing.

Smart Indicator

A smart length indicator is present on the surface of the clear PC spool for your convenience to know the length of your remaining filament.

Durable and Strong

Featuring with high impact-resistant and less warpage, PRO-3 PETG filament has minimal shrinkage and warping.

Reputation

PRO-3 PETG filament has the reputation of combining the functionality of ABS (stronger, temperature resistant, more durable) and reliability of PLA (easy to print) in one material.

To meet the demand from the 3D printing community, SainSmart launches Echo3 PLA filament that without spool.

Spool-Free Packaging

Even for novice printers who don’t use that much material, A no-spool design is more environmentally friendly. Non-biodegradable leftover spools are tossed aside into landfills and other waste dumps.

Universally Accepted

Echo3 PLA filament is considered to be one of the easiest and most widely used PLA filaments. It is suitable for both 3D printing beginners and professionals. Echo3 PLA also does not require a heated bed, opening use up to a wider range of makers and tinkerers.

Excellent Printing Performance

Echo3 uses a proprietary formula to improve its rigidity, strength and printing performance. Compared with regular PLA, Echo3 PLA filament is several times stronger and has a smoother finish. This means less down time and more prints completed.

Renewable Material

This filament is produced from a renewable source of materials, which means that the environment impact is reduced even further! This filament is also 100% biodegradable and non-toxic, making it safe to use around your home.

DIY Spool

SainSmart has designed a special spool which is the perfect size for Echo3 PLA filament. You can download the printable file from the SainSmart Wiki. We also have instructions for how to wind your non-spooled filament onto the custom SainSmart filament spool.

• TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
• Compatible with all FDM printers on the market which accept 3 mm filament. Including Ultimaker 3 and LulzBot.
• With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp.
• Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!