Brand: Genmitsu SKU: 101-61S-SD03A

SD03A, 1/4'' Shank & Cutting, 1-Flute, Spiral Downcut Cutter, 3-Pack

SKU: 101-61S-SD03A Variants ID: 32713793863759
$24.99

High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles, and dados, plunge cut leaves with a clean edge and top surface, better than straight bits.

Cost-Effective: It comes with 3PCS of the single flute spiral down-cut bits with different cutting lengths and overall length to meet your requirements. Shank Diameter: 1/4''(6.35mm), Cutting Diameter: 1/4''(6.35mm), Cutting length: 12/17/22mm, Overall length: 50/60mm.

Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.

Wide Compatibility: The SD03A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles, and dados, plunge cut leaves with a clean edge and top surface, better than straight bits.

Cost-Effective: It comes with 3PCS of the single flute spiral down-cut bits with different cutting lengths and overall length to meet your requirements. Shank Diameter: 1/4''(6.35mm), Cutting Diameter: 1/4''(6.35mm), Cutting length: 12/17/22mm, Overall length: 50/60mm.

Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.

Wide Compatibility: The SD03A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

  
Specification:

Cutting Diameter: 1/4'' (6.35mm)

Shank Diameter: 1/4'' (6.35mm)

Cutting Length: 12mm, 17mm, 22mm.

Overall Length: 50mm, 60mm.

Material: Tungsten Carbide Steel Alloy.

Coating: Nano Blue Coating


Package List:

1 x Nano Blue Coat Single Flute Spiral Downcut Cutter (Cutting Length: 12mm)

1 x Nano Blue Coat Single Flute Spiral Downcut Cutter (Cutting Length: 17mm)

1 x Nano Blue Coat Single Flute Spiral Downcut Cutter (Cutting Length: 22mm)