CNC & Engraving
Tools & Instruments
Compatibility: The Dust shoe is compatible with Genmitsu PROVerXL 4030 and other CNC machines with a 69mm diameter spindle. (Not compatible with the original Φ52mm spindle.)
Equipped with Nylon Brush for strong vacuum capability. High dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
Easy to use: Just simply put the motor into the motor hole and align the dust shoe with the spindle upwards, then fix the motor by tightening the screw.
Magnet Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Quickly pop off the nylon brush to change bits with the magnet design.
Fully Assembled: You can install it in your PROVerXL 4030 and enjoy your work with a clean workspace once you get it.$54.99
Easy Assembly & Large Working Area: Super easy to assemble and start cutting or engraving in minutes. Bigger engraving area (200mm X 160mm) than similar machines.
Advanced Motherboard: Test fire button enables you to easily run a trace of your project and knows exactly where your engraving or laser cut design will be in your stock material, return to zero, and pre-run for the perfect job every time; With XY axis double limit switch, one press to return to zero; Uses GRBL firmware compatible with Lightburn/laserGRBL, etc.
Height Adjustable Z-axis: Easily adjust the height of the laser to fit in materials of different heights and thicknesses. Expand your projects with a Rotary accessory or work with thicker materials.
Powerful Fixed Focus Laser Module: 5500MW optical power, 20W input power. Achieve 1 pass laser cutting without the need of air assist on materials like 3mm thick basswood board. Capable of engraving on all types of plastics, soft aluminum, woods, leather, acrylics, PVCs, and PCBs, the Jinsoku LE-1620 can be used on a wide range of projects and materials.
Professional Technical Support: Quick start tutorial is included in Installation Guide. If you get stuck, check out Jinsoku LE-1620 Quick Start Guide in the SainSmart Resource Center or contact us with any questions that arise.
- Pre-order now, Next batch will be shipped out in the end of June.
3-Month Carveco Maker Subscription Is Included (a $45 Value) ☛ Subscribe to receive
Get started with industry-leading CAM design software with a free 3-month subscription. Design V-Carve paths and 3D Engraving right out of the box.
V2 CNC Control Board
- GRBL 1.1F
- Frosted Clear ABS Enclosure
- Upgraded Drivers reduce heat and improved spindle power performance.
- Short Circuit Protection with Fault Indicator LED.
- Improved USB Port - Stronger than before.
- The new component layout provides higher stability performance.
Controller Software: The Genmitsu 3018-PRO uses Grbl, high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck. Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files.
Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
$269.99$249.99 SAVE $20.00