Micsig ATO-Series Automotive Tablet Oscilloscope 4 Channels 100MHz, ATO1004A
[Upgraded Touchscreen] Large 10.1-inch all-in-one touchscreen with 1280 x 800 resolution and 11x10 grid.
[Convenient Storage] Easily store waveforms, pictures, and videos with ease, with a maximum 110Mpts storage depth.
[Long Battery Life] Works without interruption with a 7.4V, 7500mAh battery, and supports up to 5 hours of continuous working battery life (varies by model and power consumption).
[Multiple I/O Ports] Includes Wi-Fi, Type-C, LAN, HDMI, USB Host/Device GND, and DC Power for easy connectivity to other devices.
[Various Diagnostic Tests] The ATO1004A supports the various automotive diagnostic test: ignition, sensors, actuators, networks, charging circuits, starter circuits, and communication tests. (including CAN, LIN, FlexRay, K, etc. ), and pressure test (cylinder pressure, intake, and exhaust pressure, fuel pressure, etc.)
Micsig Digital Automotive Tablet Oscilloscope ATO1004
The Micsig ATO1004 Automotive Oscilloscope is a a state-of-the-art digital oscilloscope with a large 10.1-inch LCD display and intuitive touch screen interface. Equipped with integrated automotive diagnostic software, this oscilloscope offers a comprehensive range of diagnostic tests specifically designed for the automotive industry.
- Charging / Start Circuit Tests: Support 12V & 24V charging/start, Charging Ripple, Cranking Current, and other tests
- Various Sensor Tests: Supports testing of ABS, Accelerator Pedal, Throttle Position, Fuel Pressure, Air Flow meter, Crankshaft, Camshaft, Knock, MAP, etc.
- Actuators: One press to get signals, Fast and Easy. Support various Actuator tests: multiple fuel injector voltages and currents, fan control signals, variable valve timing, carbon canister solenoid valves, EGR solenoid valves, etc.
- Ignition: Including Primary ignition, Secondary ignition, and combined Primary+Secondary ignition tests.
- Combination Tests: Multiple channels of the oscilloscope can be measured together to perform a variety of combined tests, such as the combined test of the Crankshaft and the Camshaft, or the combined test of the Primary Ignition and the Fuel Injector Voltage, etc.
- Network: CAN (CAN High / CAN Low), CAN FD, LIN, FlexRay, and K line
Technical Specifications
|
Model |
ATO1004 |
|
Bandwidth |
100MHz |
|
Analog channel |
4 |
|
Rise Time |
≤3.5ns |
|
Max. Sampling Rate |
1GSa/s |
|
Max. Memory Depth |
110Mpts |
|
Waveform capture rate (Max) |
78,000 wfms/s |
|
Input sensitivity range |
1mV/div ~ 10V/div |
|
Bandwith Filter |
20MHz、 Low Pass (to 30KHz) |
|
Segmented Storage |
Not Support |
|
Input impedance |
1MΩ |
|
Timebase range |
2ns/div ~ 1ks/div |
|
Support Test |
Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN L/H, CAN FD, LIN, Flexray, K line), Combination Tests |
|
Bus decoding |
UART、CAN、CAN FD、LIN、SPI、I²C |
|
Interfaces |
Wi-Fi、USB 3.0/2.0 Host、USB type-C、Grounding、HDMI、Trigger out |
|
Storage |
32GB |
|
Display |
10.1 Inch LCD capacitive touch display，1280*800 resolution，11*10 grids |
|
Battery |
7.4V、7500mAh Li-Ion battery / 5H lifetime |
|
Size/Net weight |
265*192*50mm / 1.9kg（with battery） |
Comparsion
|
Micsig ATO1004 |
||
|
Internal Storage |
32 GB |
32 GB |
|
Screen |
8 inch |
10.1 inch |
|
Memory Depth |
70 Mpts |
110 Mpts |
|
Operating System |
Android |
Android |
|
Interfaces |
Type C |
Type C |
|
Multi-function Probe Interface |
UPI |
UPI |
|
Physical Button Control |
Y |
Full Touch Screen |
|
Waveform Capture Rate (Max.): |
130,000 wfms/s |
78000 wfms/s |
What's Inclued?
- 2 pcs for 10X standard probes (incl. grounding nut, grounding crocodile clip, standard rubber plug)
- 4 x BNC banana lines (4CH)
- 4 x alligator clips (4CH)
- 4 X Flexible needle (4CH)
- Power adapter (12V DC, 4A)
- Power cord
- Smart calibration certificate
- Smart packing list
- User Manual
