This is a set of 37 sensors with Raspberry Pi B+ T GPIO Expansion Board & 40Pin Cable & Breadboard ready to be connected up to a microcontroller, e.g. Arduino or RaspberryPi. A great package for Arduino experiments or as a basis for a larger project.
Logic Level converter makes it possible to connect 3.3V (or even lower voltage sensors) to 5V micro controllers like the Raspberry Pi. With this module you can easily connect different logic voltage levels together for bi-directional communication on up to 8 channels, allowing you to use low-voltage sensors with a 5V micro-controller.
GPRS module is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with controllers via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). This module supports software power on and reset.
This expansion board is suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It duplicates the 40-pin header of the Raspberry Pi in order to support existing expansion boards.
The Raspberry Pi to Arduino shields connection bridge allows to use any of the shields, boards and modules designed for Arduino in Raspberry Pi.
This product is compatible with raspberry faction B + B motherboard and raspberry send motherboard. B + and B shall be inserted insertion method method compatible, B +'s GPIO 1 foot, the corresponding paragraph B GPIO1 pin on.
This is a special HIFI DAC expansion board designed for the Raspberry Pi B/B+, using TI's DAC chip (PCM5122), using an I2S interface.
This WIFI module is designed for Raspberry Pi. It works with Windows 7, Windows XP, Windows Vista and Windows 2000.
The board supplies RPi with a regulated +5V from a wide-range voltage source and also contains a real-time clock, a RS232 master port, a HDMI to VGA converter, 3-port USB hub, memory card reader, and 8-channel darlington Driver.