Brand: SainSmart SKU: 101-60-194

[Discontinued] Single-Axis CNC Stepper Motor Driver Controller, TB6560

SKU: 101-60-194 2 reviews Variants ID: 45099971796
$16.99
  • All usage  marked on the board, no instructions required
  • Japan-imported chip Toshiba TB6560
  • With large heat sink to ensure good heat dissipation
  • Input signal high-speed optocoupler isolation, guarantee not losing steps
  • Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
  • Attenuation model adjusted for all the motors can be locked when no noise
  • Ultra-small, the overall size: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size Φ3mm
  • The form of stud-type connectors and an optional plug-in
  • All usage  marked on the board, no instructions required
  • Japan-imported chip Toshiba TB6560
  • With large heat sink to ensure good heat dissipation
  • Input signal high-speed optocoupler isolation, guarantee not losing steps
  • Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
  • Attenuation model adjusted for all the motors can be locked when no noise
  • Ultra-small, the overall size: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size Φ3mm
  • The form of stud-type connectors and an optional plug-in
  
SPECIFICATION
Rated voltage: DC 12V-24V
Maximum current: 3.5A
Current adjustable (Current Settings): 0.5A, 1A, 1.5A, 1.8A, 2A.2.5A, 3.5A
Subdivision adjustable (Excitation Mode): 1,2,8,16
 

Attenuation adjustable (Decay Mode):

  • 0 %-- no decay mode
  • 25% of the slow decay mode
  • 50% of the normal mode
  • 100% -- Fast Decay mode
  • Decay mode of regulation by different motors to match impedance, thereby eliminating the noise when locked stepper motor and motor movement in the shake.

 

Automatic half current setting (Torque Settings):

  • 0%---- No pulse when the current 20 to normal operating current of 20%
  • 50 %---- no pulse current 50% to normal operating current
  • 75 %---- no pulse current 75% to normal operating current
  • 100% --- no pulse when the current 100% to normal operating current
WHAT’S IN THE PACKAGE
  • 1x SainSmart Single 1 Axis 3.5A TB6560 Stepper Motor Driver
  • 3x Terminals