Creality CFS Multi-Color 3D Printer Filament System, Auto Material Identification, Smart Switching/Relay, Supports 4 Parallel Devices for 16 Color Printing, Compatible with K2 Plus/Hi Series 3D Printers
Creality CFS Multi-Color 3D Printer Filament System, Auto Material Identification, Smart Switching/Relay, Supports 4 Parallel Devices for 16 Color Printing, Compatible with K2 Plus/Hi Series 3D Printers
- 101-91F-MFS
Couldn't load pickup availability
Print in 16 Colors, Unleash Your Creativity: Each CFS unit can hold up to four 1 kg filament rolls. Link up to four units to access 16 colors in one print, no painting required! It is compatible with Tri-Star Hyper RFID filaments for instant recognition and seamless integration.
Smart Filament Management with Auto Mapping & Switching: The CFS communicates directly with Creality printers and the Creality Print Slicer, automatically mapping filaments by type and colour. It supports automatic switching and relaying between spools for uninterrupted multi-colour printing.
RFID-Enabled Auto Identification: Load RFID-tagged filaments and let CFS identify color, type, and status automatically. All data syncs with your printer to streamline workflow and reduce manual input.
Run-out & Tangle Detection with Real-Time Alerts: Built-in sensors monitor each spool. If filament runs out or tangles, CFS pauses the print and alerts you instantly, ensuring smooth and uninterrupted jobs.
Moisture-Resistant, Airtight Storage: The airtight design and integrated desiccant keep filaments dry and print-ready. Real-time temperature and humidity display lets you monitor storage conditions at a glance.
Snap-away Support Enabled
CFS can deliver model supports in different materials that can be easily snapped away or even be water-soluble. The resulting 3D model will not show any support marks
Auto Filament Identification
Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printer. For regular filaments, you can also edit the info manually
Auto Filament Switch & Relay
CFS can switch filaments fluently and precisely for a multicolor task.It can also relay a running-out spool with a similar one installed. Minimal interruption and waste
Auto Run-out/Tangle Detection
Sensors are used to watch over each spool of filament. When a filament runs out or gets tangled, it will pause and notify you immediately
Auto Filament Mapping
CFS is programmed to communicate seamlessly with
Creality 3D printers and Creality Print Slicer. So it can select from the installed filaments by type and color as the G-code file dictates
Moisture-proof Filament Storage
Temperature & Humidity Display
Spring-loaded Batten Bar
Cardboard Spool Compatibility
FAQs
Q1: Can I use the CFS with my Creality K1/K1 Max/Ender series printer?
A1: The CFS is currently only compatible with the Creality K2 Plus and Hi Series printers by default. If you want to use it with K1/K1 Max/K1C or Ender series, you'll need the official K1 Series CFS Upgrade Kit. Please contact us for more details.
Q2: How many filaments can I use at once?
A2: Each CFS unit can hold four 1kg filament rolls. You can connect up to four CFS units, allowing you to print with up to 16 different colors in a single job.
Q3: Does CFS work with flexible filaments like TPU or PVA?
A3: No, CFS is not compatible with flexible TPU, wet BVOH/PVA, or deformed cardboard filament spools. For best results, use standard PLA, ABS, PETG, or Hyper RFID-supported filaments.
Q4: What types of filament spools does it support?
A4: The CFS supports most standard 1kg spools and is especially compatible with Tristar Hyper RFID filaments. However, warped or non-standard cardboard spools may affect feeding performance.