Micsig SATO1004 Digital Automotive Tablet Oscilloscope upgraded version of ATO1104
Micsig Digital Automotive Tablet Oscilloscope SATO1004
The Micsig SATO1004 Automotive Oscilloscope is a digital oscilloscope with an 8-inch LCD display, a touch screen, and integrated software for car diagnostics. The oscilloscopes have integrated automotive diagnostic software, providing various diagnostic tests relevant to the automotive sector.
Unparalleled Operating Experience
8-inch TFT-LCD capacitive touch screen with 800 * 600 resolution, integrates a new generation of hardware & software technologies.
High bandwidth, High sampling rate, Large memory depth, excellent signal capture performance.
Portable & Benchtop
Built-in 7500mAh Li-ion battery support 5h long fieldwork;
Power-off lock secures safety to carry and store;
Triangle link rear stand make sure it sits on the bench solidly
Multi-function Button Panel
Highly integrated multifunctional buttons, and innovative 5-Way navigation sticks, deliver quick & accurate control of various operations.
Various Actuator Tests
One press to get signals, Fast and Easy.
Support various Actuator tests: multiple fuel injector voltages and currents, fan control signals, variable valve timing, carbon canister solenoid valves, EGR solenoid valves, etc.
Multiple channels of the oscilloscope can be measured together to perform a variety of combined tests, such as the combined test of the Crankshaft and the Camshaft, the combined test of the Primary Ignition and the Fuel Injector Voltage, etc.
Including Primary ignition, Secondary ignition, and combined Primary+Secondary ignition tests.
CAN (CAN High / CAN Low), CAN FD, LIN, FlexRay, and Kline.
Charging / Start Circuit Tests
Support 12V & 24V charging/start, Charging Ripple, Cranking Current and other tests.
Various Sensor Tests
Supports testing of ABS, Accelerator Pedal, Throttle Position, Fuel Pressure, Air Flow meter, Crankshaft, Camshaft, Knock, MAP, etc.
|Sampling Rate (Max.):||1GSa/S (single channel)|
|Memory Depth:||70Mpts (single channel)|
|Waveform Capture Rate (Max.):||130,000 wfms/s|
|Support Tests:||Charging Circuits, Starter Circuits, Sensors, Actuators, Ignition, Networks (including CAN, LIN, Flexray, K line, etc.), Combination Tests|
|Bandwidth Filter:||Full bandwidth, Low pass|
|Interfaces:||Wi-Fi, USB 3.0/2.0 Host, USB Type-C, Grounding, HDMI, Trigger out|
|Display:||Industrial 8" TFT-LCD (800*600), 14*10 grids|
|Dimension / Net Weight:||265*192*50mm / 1.9kg (with battery)|
|Battery:||7.4V, 7500mAh, Li-ion battery|
Differences from SATO1004 against ATO1104
|Micsig SATO1004 Automotive Tablet Oscilloscope||Micsig ATO1104 Automotive Tablet Oscilloscope|
|Internal Storage||32 GB||8 GB|
|Memory Depth||70 Mpts||28 Mpts|
|Interfaces||Type C||USB Micro-B|
|Multi-function Probe Interface||UPI||/|
|Physical Button Control||✓||/|