CNC & Engraving
Tools & Instruments
- Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO. Box dimensions are 18.3 x 15.5 x 12 in (464 x 394 x 304 mm).
- Lighter and easier to assemble, no screws needed.
- Cut down dust and keep your workspace clean. Perfect for your desktop or workbench.
- Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
- Two Pre-cut Holes for easy access to your offline controller, or other external devices.
- Input voltage: 24V (12-24V).
- Software: GRBL controller, UniversalGcodeSender.
- Stepper motor drive: DRV8825 ，Spindle power: 150W.
- Support XYZ three-axis control, spindle, laser head. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-").
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
With SainSmart offline controller module, you can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.
The location of XYZ Axis can be adjusted manually as engraving starting point. The spindle open or close mode also can be controlled manually by this module.
Two-way Access The File
The engraving filed can be directly recognized once you put the file in the SD card. You can also connect the offline module to the computer by micro USB cable, then store the file directly.
Easy to Use
All you have to do is connect the offline module to the GRBL controller board, then you can control the CNC router with this module.
Compatible with SainSmart Genmitsu CNC Router
This offline module is perfectly compatible with SainSmart Genmitsu CNC Router 3018, 3018-Pro, 1810-Pro. (not compatible with MX-3)
$24.99$22.99 SAVE $2.00