Genmitsu Parts & Accessories
This laser module is ideal for engraving, cutting, scribing, and drilling, it can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.. Desired patterns can be made easily on the wood or plastic by this unit. Fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules. This module is compatible with PROVerXL 4030, 3020-PRO MAX, 3018-PRO. (How to install?)
YOU MAY ALSO LIKE: Fixed Focus Laser Module for 3018-PROVer | Compressed FAC Laser Module for PROVerXL 4030
Compatibility: Compatible with 6060 XY-Axis Extension Kit of Genmitsu PROVerXL 4030.
Dust Baffle Included: This kit comes with two dust baffles, which keep the Y-frames on both sides clean to work properly.
High Quality: Made of high strength aluminum alloys. Strong and durable. Compared with MDF Spoilboard, the aluminum base can be used with a Coolant Mist System and will not expand.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoilboards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
You May Also Like: T-track & Threaded Hold Down Clamps | Bench Vise Clamp
UK orders estimate ship from March.
This clamp can be used with a T-Slot Aluminum Spoilboard or Threaded MDF Spoilboard of Genmitsu PROVerXL 4030 CNC router kit. It provides exceptional clamping forces for your universal t-track system configurations and assemblies. This clamp system is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
Compatibility: The Dust shoe is compatible with a 69mm diameter spindle, If you are using a big size & high power spindle, like the DeWalt spindle installed on our Genmitsu PROVerXL 4030 or other CNC machines, this dust shoe will bring you a clean workspace.
Equipped with Nylon Brush for strong vacuum capability. High dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving. (Not compatible with the original Φ52mm spindle.)
Easy to use: Just simply put the motor into the motor hole and align the dust shoe with the spindle upwards, then fix the motor by tightening the screw.
Magnet Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Quickly pop off the nylon brush to change bits with the magnet design.
This 6060 extension kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making more. Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board is available, MDF Board will also be available soon. Simple assembly with the Installation Guide located in our at the resource center.
Drop in upgrade for your Sainsmart Genmitsu PROVerXL 4030.
High Quality: Made of high-strength aluminum alloys. Strong and durable.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoil boards or jigs.
Ease of Use: Each Aluminum Base piece comes with 4 T-Slots on both sides, the standard size is 0.7cm. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
YOU MAY ALSO LIKE: MDF Spoilboard for PROVerXL 4030
Dimensions: 260mm(L) x 140mm(W) x 40mm(H). Clamping Range: 0-115mm.
Graduated Ruler: Easy to read ruler, there is no need to use another ruler to measure the object when processing.
Right-angle Iron Slider: Located at the upper left corner, it can be easily adjusted to ensure your working stock is square and in just the right position.
V-groove Design: More clamping force to your stock material in place, especially for holding cylindrical objects.
Application: Used for object processing. It can hold various specifications and irregular shapes. Ideal for holding small parts, Jewelry, Watch, Hobby, Model making, Electronics, Home and Work-Bench, and many other applications.
YOU MAY ALSO LIKE: Aluminum Spoilboard for PROVerXL 4030
Compatible with PROVerXL 4030: This offline module is only compatible with Genmitsu CNC Router PROVerXL series controllers.
Easy to Use: This offline controller features an easy to read 2.4” Touchscreen display. How to use it? (Read)
Manual Control: Take control of your PROVerXL 4030 through this control module. It’s easier to jog your machine on the fly and toggle your spindle on/off.
Easy File Access and Transferring: Your generated G CODE projects will be recognized simply by adding them to the SD Card.
No PC Offline Control: With the Genmitsu offline controller module, you can control the CNC router without connecting to a computer. Easily load your projects onto the included SD card and have them ready to go without the need of a dedicated laptop or computer.
Level up your CNC
This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to 1010 (39”x 40”) with pre-installed axis carriages. Evolve with your CNC with a full range of expansion kits for the PROVerXL 1010, PROVerXL 6060 and upgrade as you go, start big and get to making MORE.
The kit comes with Upgraded Lead Screws and Aluminum extrusions, eliminate wobble and increase frame rigidity. A full drag chain and cable harness are also included. You don’t need to worry about making your own wiring extension, just replace it.
We will take you through the assembly process every step of the way. You can find the Installation Guide located in our resource center
Save money by expanding your PROVerXL to fit your needs. You don’t need to spend more on complicated kit and hours of assembly. (Spoilboard is coming soon, stay tuned.)
This 6060 extension kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making more. Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board is available, MDF Board will also be available soon. Simple assembly with the Installation Guide located in our at the resource center.
Compatibility: Compatible with 6060 XY-Axis Extension Kit of Genmitsu PROVerXL 4030.
Dust Baffle Included: This kit comes with two dust baffles, which keep the Y-frames on both sides clean to work properly.
High Quality: Made of high strength aluminum alloys. Strong and durable. Compared with MDF Spoilboard, the aluminum base can be used with a Coolant Mist System and will not expand.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoilboards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
You May Also Like: T-track & Threaded Hold Down Clamps | Bench Vise Clamp
UK orders estimate ship from March.
Compatible with PROVerXL 4030: This offline module is only compatible with Genmitsu CNC Router PROVerXL series controllers.
Easy to Use: This offline controller features an easy to read 2.4” Touchscreen display.
Manual Control: Take control of your PROVerXL 4030 through this control module. It’s easier to jog your machine on the fly and toggle your spindle on/off.
Easy File Access and Transferring: Your generated G CODE projects will be recognized simply by adding them to the SD Card.
No PC Offline Control: With the Genmitsu offline controller module, you can control the CNC router without connecting to a computer. Easily load your projects onto the included SD card and have them ready to go without the need of a dedicated laptop or computer.
Dimensions: 260mm(L) x 140mm(W) x 40mm(H). Clamping Range: 0-115mm.
Graduated Ruler: Easy to read ruler, there is no need to use another ruler to measure the object when processing.
Right-angle Iron Slider: Located at the upper left corner, it can be easily adjusted to ensure your working stock is square and in just the right position.
V-groove Design: More clamping force to your stock material in place, especially for holding cylindrical objects.
Application: Used for object processing. It can hold various specifications and irregular shapes. Ideal for holding small parts, Jewelry, Watch, Hobby, Model making, Electronics, Home and Work-Bench, and many other applications.