Modules – SainSmart.com

Modules – SainSmart.com

Sort by

WIP
ONLY
NRF24L01+ Wireless Transceiver Module 2.4GHz ISM band
This is a 2.4GHz Wireless Complete Module.
Wireless communication become extremely easy.
- 8051 / AVR / PIC low power controller can also drive this easily.
- Source Code and manual provided
- High portability! Increase development efficiency & lower development cost.
$6.99

WIP
ONLY
Mifare RFID-RC522 IC Card Reader Module
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip,
- Easy to use, non contact card reader module
- This module can be directly loaded into the various reader molds
- Working current :13-26mA/DC 3.3V
$9.99

WIP
ONLY
GSM TC35 SMS Module with Voice adapter
The SIEMENS TC35 is a standard AT commands Based GSM module, you can easily apply it with your own embedded system to creat a GSM wireless based data transfer module .Support Arduino!
- The SIEMENS TC35 Module is AT Command - controlled gsm modem, via Serial Port (RS232/TTL communication).
- Program source code would be provided so that buyers can use the module easily and get familiar with the module quickly.
- Common applications are (sending/receiving) SMS control, phone calling.
- Power supply: DC 5V
- Frenquency: 900 1800
$25.99

WIP
ONLY

SainSmart PWM DC Converter, 12V-36V 5A 10A DC Motor Speed Adjuster Controller Driver

$12.99

WIP
ONLY
Network Web Server 16 Channels Relay Ethernet Controller Module, Remote Control Board, LAN WAN WEB Server, RJ45 Port
This is an Ethernet Controller board based on iMatic system which could be compatible with the 16 Channels relay.
- Control switches remotely together with 16 Channel relay!
- RJ45 interface, via RJ45 telecommunications connection for network control.
- Support for 16 Channels relay which means you could controll more to 16 different devices at the same time.
- Unique dual TCP connect control, corresponding with above trait, local as TCP server
- accept client control, when connect to remote server as TCP client
- Supply core module detailed information
- Default IP:192.168.1.4 prot:30000 http://192.168.1.4/30000 (You could change the default IP address)
$35.99

WIP
ONLY

[Discontinued] 3 Pack SainSmart Mechanical Endstop for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280

$8.99

WIP
ONLY Sale

[Discontinued] AD9850 DDS Signal Generator Module IC Test Equipment Sine Square Wave 0-40MHz

$9.99 ~~$12.99~~

WIP
ONLY

SainSmart GT2 20T Aluminum Pulley Synchronous Gear for 3D printer Reprap

$4.99

WIP
ONLY
Programmable Resistor Board, Step 1R, 1%, 1/2 Watt
This is "resistance substitution box" good low-cost alternative solution, can flexible and quick setting resistance range from 1R to 9999999R, step accuracy 1R. for educational experiments, electronic engineering design or test trimming are excellent applications.
- Design based on “resistors series” theorem.
- 1/2 watt tolerance +/-1% SMD resistors.
- Screw terminal block easy to connect wires.
- High quality FR4 glass fiber PCB.
- With spare parts 10 pieces jumper caps (on board 7 pieces, total 17 pieces).
$6.99

WIP
ONLY

Compensated Crystal Components Module for FT-817/857/897 TCXO-9 22.625MH

$18.99

WIP
ONLY

I2C Raspberry Pi GPIO Expansion Board

$11.99

WIP
ONLY

[Discontinued] SainSmart 5V DC Infrared Remote Controllor with 4 Channels Relay Receiver Model

$8.99