Genmitsu Offline Control Module with LCD Touchscreen for PROVerXL 4030
Compatible with PROVerXL 4030: This offline module is only compatible with Genmitsu CNC Router PROVerXL series controllers.
Easy to Use: This offline controller features an easy to read 2.4” Touchscreen display.
Manual Control: Take control of your PROVerXL 4030 through this control module. It’s easier to jog your machine on the fly and toggle your spindle on/off.
Easy File Access and Transferring: Your generated G CODE projects will be recognized simply by adding them to the SD Card.
No PC Offline Control: With the Genmitsu offline controller module, you can control the CNC router without connecting to a computer. Easily load your projects onto the included SD card and have them ready to go without the need of a dedicated laptop or computer.
- Control X, Y, Z-axis moving
- Control spindle/laser on/off Zero X, Y and Z axis
- Adjust the PWM
- Reset and resume the machine, unlock emergency stop switch
Touchscreen LCD Display
Easy File Access and Transferring
Software: GRBL controller, Universal G-code Sender
Input voltage: 12-36V
Spindle drive chip: MOSFET (recommendation 12~36V, current: within 10A)
Spindle PWM speed: Support
Support stepper motor: 12V, a maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)
Laser engraving: Support
1 x Offline Controller
1 x 8P Cable (20.4" / 52cm)
1 x SD Card Adapter
1 x TF Card(1G)
First impression so small like kids toy. But by price is acceptable. From first experience useful tool for computer free operation. I would suggest to add 20 step or even conti in Jog/Close button. Pressing 10 several times to make long move is frustrating. In Manual there is no explanation of PWM/SPN buttons also in Jog Menu. Other functions works fine no big issues so far. I am satisfied in general from this investment. Marek Poland
Controller is usable, it has all functions required to run cnc without computer attached (jogging, homing, setting home, z-probe). Drawbacks for me: - better touch acknowledge (beeper?) would be useful - there is thin red rectangle showing around "pressed" button, but it is difficult to see it through your finger, - when you select file and than cancel before starting processing (e.g. you accidentally tapped wrong file), cnc controller is reset - you loose your settings including home origin, which is at least ANNOYING and with job splited to more than 1 file (to change tool) if you cannot re-set properly home origin, you end with "de-synchronized" tool position and unable to finish job.
Excellent useful bit of kit. Saves .e having to take laptop out to shed. Very user friendly.
This thing is great. No need to tie up laptop. Use sd card then I can run cnc while designing on laptop. Saves me a lot of time. Rich screen is great.
Very happy with not having to leave my laptop connected to the 3040. But I wish the connecting ribbon cable was a little more thought through and matched the round cabling and would love to see a mounting bracket for the controller to the machine. other than that I'm very happy
Frustrating! I haven’t got it figured out yet!! However, I haven’t given up!
Received unit today. Attached to 4030xl. The controller can jog the spindle around. Setting zero is an issue. Currently, checking website for manual on new controller. Will update once it runs the unit as well as my laptop.
This control is built well and has a solid feel when holding it. No complaints about the control but the cable is too short , it needs to be twice the length.