The GT-3 Hyper Speed ASA filament combines rapid print speeds of up to 500 mm/s with exceptional print quality. Experience consistently amazing results by giving your high-speed printer a turbo boost! We recommend a printing speed of around 300 mm/s for optimal results.
When using adhesive, follow these guidelines:
- Clean the print bed with water, soap, or alcohol. Ensure the build plate is clean and free from any previous adhesive residue.
- Squeeze the bottle and apply the adhesive evenly to the print area using a spatula or other applicator.
- Heat the build plate to the recommended temperature for ASA, typically around 90-110°C.
- Remove the object:
- When the printing temperature is below 300°C, wait for the print bed to cool down before removing the printed object.
- When the printing temperature is above 300°C, it is recommended to remove the printed object as soon as possible.
- When using ABS on a glass print bed, it is suggested to first apply painter's tape or a similar material to the glass surface. Afterward, apply adhesive to further protect the surface and reduce the risk of glass bed breakage.