LandTiger Development Board with NXP LPC1768 ARM is based on the second-generation ARM Cortex-M3 microcontroller core. It is designed for embedded system applications requiring a high-performance, low-power 32-bit microprocessor for instrumentation, industrial communications, motor control, lighting control, and alarm systems. The LandTiger development board features an onboard USB emulator, supports USB 2.0 Device, dual CAN interfaces, and RS-485 interface functions. It provides a wealth of routine and detailed information to help users quickly develop projects.
Specifications
- Cortex-M3 with 512KB on-chip Flash, supporting ISP and IAP
- 64KB SRAM
- Processing rate: 100MHz, with eight areas of memory protection unit (MPU)
- Built-in nested vector interrupt controller
- AHB multi-layer matrix with 8-channel DMA controller (GPDMA)
- Supports SSP, UART, AD/DA, timer, GPIO, etc., for memory-to-memory transfers
- Standard JTAG test/debug interface and debug serial line
- Simulation trace module supports real-time tracking
- 4 low-power modes: sleep, deep sleep, power-down, deep power-down
- Single 3.3V power supply (2.4V - 3.6V)
- Operating temperature: -40°C to 85°C
- Non-maskable interrupt (NMI) input
- On-chip integrated power-on reset circuit
- Built-in SysTick timer for operating system migration
Onboard Resources
- 2-Way RS232 serial interface (supports ISP download via straight-through serial cable)
- 2 CAN bus communication interfaces (CAN Transceiver: SN65VHD230)
- RS485 communication interface (485 Transceiver: SP3485)
- RJ45-10/100M Ethernet network interface (Ethernet PHY: DP83848)
- DA output interface (for onboard speaker and output driver)
- AD input interface (adjustable potentiometer input)
- Color LCD display interface (supports 2.8-inch or 3.2-inch TFT 320x240)
- USB 2.0 Interface, supporting both host and device
- SD/MMC card (SPI) interface (compatible with FAT12, FAT16, FAT32)
- IIC Interface (24LC02)
- SPI serial FLASH interfaces (AT45DB161D)
- 2 user keys, 2 function keys, INT0 Reset button, and 8 LED lights
- Joystick with 5 keys
- Serial ISP download function (no need to set jumpers), standard JTAG download, and simulation debugging interface
- Integrated USB emulator for simulation and debugging, supporting KEIL, IAR, and other mainstream development environments
- Optional external 5V power supply or USB input
- Leads for all IO, facilitating user-friendly external circuit development
What's in the Package
1x Land Tiger V2.0 Development Board
1x 3.2-inch Color Touch Module
1x USB Cable
1x Serial Download Cable
1x Ethernet Cable
1x 5V AC Adapter
1x CD ROM