Shop Categories
Sort:
High Quality -- The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
Applicable Materials -- Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility --The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μmtungsten steel that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Specially designed for ultra-fine carving projects, including 4x tapered ball nose end mills, 4x single flute spiral end mills, 2x flat bottom carbide engraving bits. Shank Diameter: 3.175mm, Cutting diameter: 0.1 - 3.1mm (0.1, 0.2, 0.25, 0.5, 0.75, 1, 2, 3.1mm) , Overall Length: 38mm.
Versatile：Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility: Genmitsu EM10A micro-cutting diameter end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm ttungsten steel that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Up&Down Cut Advantage: The compression bits (up-down bits) offers the benefits of both up and down cut bits. The bit is a standard down cut, but its tip is an up cutter. Therefore, when cutting materials like plywood, you will end up with a clean edge on both sides because the top is pushed down while the bottom is pulled up.
Cost-Effective: Including 5pcs 2-flute compression spiral bits, Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 12, 15, 25, 28, 32mm / Overall Length:40, 55, 60, 65mm.
Recommend Material: Laminates, composites, plywood, plastic, soft metal etc. Note that compression bits should never be used to drill deep holes.
Wide Compatibility: Genmitsu SC05A 2-Flute compression bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm Tungsten Carbide Steel Alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity, which provides longevity and produces cutting results of the highest quality.
Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles and dados, plunge cut leave with clean edge and top surface, better than straight bits.
Cost-Effective: It comes with 6PCS 2-flute spiral down-cut bits with different cutting length and overall length to meet your requirements. Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting length: 8-22mm (8/10/12/15/17/22mm), Overall length: 40-55mm (40/40/40/45/45/55mm)
Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.
Wide Compatibility: The SD06A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
High Precision Material: These rotary tool bits are made with premium Tungsten Carbide Steel Alloy, a highly durable material that is guaranteed to withstand the test of time. With a double-cut tooth angle that prevents chipping, this tungsten carbide bit set is superior to any high-speed steel burrs.
Double Cut Design: The groove lines of these carbide rotary burr's head are crossed, which makes it suitable for deburring and polishing wood, cast iron, cast steel, carbon steel, alloy steel, all kinds of metal and other materials.
Wide Application: 1/8'' shank fits all Genmitsu CNC router machine and most small rotary tools with three jaw chuck for accurate centering. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.
Nano Blue Coating: It enables the tool's cutting edge to retain crucial sharpness and lubricity with an extreme Nano hardness and heat resistance, which provides longevity and produces cutting results of the highest quality.
Portable Kit: It comes with a plastic storage case for safety storage and protection. You can take and use it anywhere with this portable kit.
High Precision Material: The router bits set is made of high-speed steel with titanium coating. It's durable and effortless. Total length: 40mm; shank diameter: 1/8''.
Variety of Bits: Includes the most commonly used router bit types, straight, trim, V groove, beading, cove, slot cutter, and more to meet your different needs. Great for all types of detail work in woodworking.
Wide Application: 1/8'' shank fits all Genmitsu CNC router machine and most rotary tools. Suitable to engrave on a wide range of materials including wood, ABS, acrylic, PVC, plastics, etc.
Titanium Coating: The hardness of the bits are enhanced with titanium coating. And it reduces the frictional resistance coefficient of the bits at high speed to improve the smoothness of the machined surface.
Portable Kit: It comes with a plastic storage case for safety storage and protection. You can take and use it anywhere with this portable kit.
High Quality: The rotary burr set is made of high-speed steel with titanium coating, which is durable and effortless. Shank diameter: 3.175mm / Cutting diameter: 2-8mm / Cutting length: 3-10mm / Over length: 40mm.
Versatile: Mainly used for groove processing and surface polishing of copper, iron, aluminum, alloy, and other medium hardness metal materials. It can also be used for milling of non-metallic materials such as plastics and wood.
Titanium Coating: The hardness of the bits are enhanced with the Titanium coating. And it reduces the frictional resistance coefficient of the bits at high speed to improve the smoothness of the machined surface.
Wide Compatibility: 1/8'' shank fits all Genmitsu CNC router machine and most small rotary tools. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.
Convenient to Use: It comes with a plastic storage case for safety storage and protection. You can take and use it anywhere with this portable kit.
High-quality Material: The end mills are made of tungsten carbide steel alloy that can keep continuous machining for 800 minutes.
Nano Blue Coating: The end mills are Nano blue coating, which is high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Shank diameter: 1/8'' (3.175mm), cutting diameter: 0.8mm-2.5mm (0.8/1.0/1.5/2.0/2.0/2.0/2.0/2.0/2.5/2.5mm), cutting length: 4mm-22mm, overall length: 38mm.
Applicable Materials: Suitable for such as wood, MDF, plastics, acrylic, aluminum, soft metal, etc.
Versatile: Widely used for metalwork, toolmaking, model engineering, carving, cutting, engraving, milling, slotting, drilling, sculpting.
