Micsig DP10007 High Voltage Differential Probe Kit
Widely Used: The attenuation rate is 10X/100X, widely used in any brand of an oscilloscope.
Maximum differential test voltage (DC+ACPK-PK): 70V (10X), 700V (100X). You can safely measure floating voltages up to 700V and have a bandwidth of up to 100 MHz.
Easier and Safer Use: High voltage differential probes sample high impedance isolation between input and output to protect personal safety. Power supply USB DC 5V output, more portable while Oscilloscope has a USB interface.
Versatile Kit: All 6 pieces with three different connectors help to test various on different occasions, including 2 alligator clips, 2 hook clips, and 2 pincer clips.
Applications: Floating Measurements, Switch-Mode Power Supply (SMPS), Motor Drive Design, Power Device Testing & Evaluation, Power Converter Testing & Design.
Micsig DP10007 High Voltage Differential Probe is designed for professionals and experts like you to be used with most oscilloscopes in the market. It allows you to safely measure floating voltages up to 700V and has a bandwidth of up to 100 MHz. DP10013 can work in two different attenuation ranges: 100X for a maximum test voltage of 700V and 10X for a maximum test voltage of 70V.
Floating Vlotages up to 700V
Easier and Safer Use
How to use the DP10007
- Only qualified personnel should perform service procedures.
- Do not touch exposed connections and components when power is present.
- While the probe is over the range, please cut off the power and input it immediately.
- Do Not Operate in an Explosive Atmosphere.
- Do Not Operate in Wet/Damp Conditions.
- Keep Product Surfaces Clean and Dry.
Rise Time: 3.5ns
Range Selection(Attenuation Rate): 10X/ 100X
Maximum Differential Test Voltage(DC+ACPK): 70V(10X)/ 700V(100X)
Maximum input common mode voltage(DC+ACPK): 70V(10X)/ 700V(100X)
Maximum Input Voltage-to-Earth: 600V CAT Ⅰ/ 1000V CAT Ⅱ
CMRR：≤-80dB@50Hz, ≤-60dB@20KHz, ≤-50dB@1MHz, ≤-40dB@10MHz
Input Impedance: 8MΩ/1.25pF(differential), 4MΩ/2.5pF(single-ended to ground)
Output Voltage: ≤7V
Overload Alarm: Button light flashes
Power Supply: DC 5V, USB Supply
Input cable length: Approx 45cm
Output cable length: Approx 90cm
Operating Temperature: 0℃~40℃
Operating Humidity: 10%~85%RH
Storage Temperature: -30~70℃
Storage Humidity: 5%~90%RH
1x Power Supply
1x USB power cable
2x hook clips, in red and black pairs
2x alligator clips, in red and black pairs
2x pincer clips, in red and black pairs
1x storage box
1x Chinese manual
Does "floating" mean isolated? I don't want a grounding problem to blow the ass out of my scope.
Answer:Yes it is isolated from the scope ground That is why it use a separate 5 volt power supply
Does the probe set come with a hard case?
Is this a bnc connector? would it work with a pico 2000 scope?
Micsig DP10013 is definitely a BNC connector, it suitable for all oscilloscopes with BNC interface.