SPECIFICATION
Selection Guide
| Kits | Motor (4 PCS) | Power Supply (1 PCS) | Control Board (1 PCS) | Driver (4 PCS) | Jumper Wires (4 PCS) | USB Cable (1 PCS) | Parallel Cable (1 PCS) | CD (1 PCS) |
|---|---|---|---|---|---|---|---|---|
| TB6560 + PARALLEL V6 BOARD | 57HS76 | S-250-24 | Parallel Interface Board V6 | TB6560 | XH2.54 | A to A | DB25 Male to Male Cable | √ |
| TB6600 + PARALLEL V8 BOARD | 57HS76 | S-250-24 | Parallel Interface Board V8 | TB6600 | XH2.54 | A to A | DB25 Male to Male Cable | √ |
| TB6560 + USB STB4100 BOARD | 57HS76 | S-250-24 | USB Interface Board STB4100 | TB6560 | ⅹ | A to B | ⅹ | √ |
| TB6600 + USB STB4100 BOARD | 57HS76 | S-250-24 | USB Interface Board STB4100 | TB6600 | ⅹ | A to B | ⅹ | √ |
| ST-4045-A1 + MACH3 V6 BOARD | 57HS76 | S-350-36 | Mach3 Interface Board V6 | ST-4045-A1 | ⅹ | A to A | DB25 Male to Male Cable | √ |
| ST-4045-A1 + USB STB4100 BOARD | 57HS76 | S-350-36 | USB Interface Board STB4100 | ST-4045-A1 | ⅹ | A to B | ⅹ | √ |
Stepper Motor
Model: 57HS76
Number of Phases: 2-phase
Number of Wires: 4-wire
Phase Voltage: 3.08V
Phase Current: 3A
Resistance: 1.1Ω
Inductance: 3.6mH
Torque: 1.89N·m (270 Oz-in)
Shaft Diameter: 8mm (0.3 inch)
Axial Length: 21mm (0.8 inch)
Side Length: 57mm (2.2 inch)
Height: 76mm (3 inch)
Weight: 1100g (38.8 oz)
Switching Power Supply
- AC input voltage range is adjustable via switch.
- High efficiency and reliability.
- 100% full load burn-in test.
- Protections: Short circuit, overload, overvoltage, and over-temperature.
- Built-in cooling DC fan control.
- Working frequency: 25 kHz.
- Input Voltage: 220V/115V.
- Output Voltage: 24V.
- Output Current: 10A.
- Output Power: 250W.
WHAT’S IN THE PACKAGE
- 1 x 24V/10A switching power supply
- 4 x 1 Axis TB6560 stepper motor driver
- 4 x 57HS76 3A 270 oz/in stepper motor
- 1 x 5 axis breakout board
- 1 x DB25 parallel cable
- 1 x USB cable
- 4 x signal cables
- 1 x CD