Creality Rechargeable Weight Measuring Filament Spool Holder with Bearings
Built-in Bearing: Quality bearing allows for smooth filament feeding, reducing the stress on your extruder while pulling filaments.
Weight Sensor: Bright and Sharp Digital Display and Accurate Weighing Sensor combined to provide precise weight reading for your filament spool, so you can make full use of your remaining filaments.
Large Diameter Spool: The increase in filament spool diameter makes it better fitted for different spool sizes. With less shaking, it further minimizes the filament feeding resistance and roller wear.
Rechargeable Battery: With one single charge, the battery inside this filament spool can sustain for up to six months.
Wide Compatibility: Creality Digital Filament Spool Holder is widely compatible with most FDM 3d printers on the market. It is a must-have upgrade that improves your 3d printing experience.
Why do I need a water cooling kit?
Handling constant high-temperature printing leads to a reduced lifespan for your 3d printer components. Even with high-end 3d printers like Ender-3 S1 Pro and CR-10 Smart Pro that are equipped with the all-metal hot end, high-temp nozzle, and Sprite Extruder Pro, extrusion issues and clogging can occur in a hot environment. You can not benefit much from a water cooling kit if you print regular filaments like PLA only, but if you print more demanding materials like PETG, ABS, or even engineering materials like Carbon Fiber Nylon and PEEK a lot, the Creality Water Cooling Kit is then an essential upgrade for you.
Effective Water Cooling
Under the same conditions, a water cooling setup helps keep the printer running 10°C - 15°C colder with heat dissipation efficiency improved by 20% when compared with an air cooling solution.
Silent Centrifugal Pump
A silent centrifugal pump brings the noise level of this water cooling kit down to 45dB. The high-performance pump also ensures a stable and reliable liquid cooling loop.
Features:
Fast Cooling
Aluminum radiator with precise runner system speeds up heat transfer for better high-temp printing performance.
Leak-free Design
With industry-grade sealing parts, the risk of leaking is greatly reduced. Note: Coolant must be used in this kit, do not use water to replace it.
Quality Tubing
Flexible Silicone Tubing is more durable and has better chemical and beading resistance. It can also reduce evaporation.
Compatibility
Creality Water Cooling Kit is compatible with Creality Ender 3 S1, Ender 3 S1 Pro, CR-10 Smart Pro, or Other 3D Printers with Sprite Extruder Pro.
Specifications
| Product Name | Creality Water Cooling Kit |
| Model Number | CR-W01 |
| Voltage | DC 12V |
| Current | 0.3A |
| Wattage | 3.1W |
| Operating Temp | 0°C - 50°C |
| Hydraulic Head | 1.13M |
| Flow Rate | 1.53L/H |
| Volume | 125ML |
| Noise | ≤45dB |
| Product Size | 191mm*63mm*63mm |
