Why Air-Assist System is a must-have add-on for your laser engraver and cutter?
- It regulates the laser beam to be more precise and keeps your workpiece cool, so your engraving and cutting jobs will have a cleaner finish.
- It reduces the laser power loss by pushing smoke and residues away from the material, so your laser work can be done faster with an enhanced finish.
- It also protects your laser from residue buildup and overheating, improving the service life of your laser module.
Specification:
- Nozzle diameter: 6mm
- Recommended Hose Diameter: 5mm
- Flow Rate: 8PLM
- Power: DC12V
- Rated Current 0.6A
- Maximum Vacuum Pressure: -55KPa
- Maximum Positive Pressure: 80KPa
- Lifespan: ≥500 hours
⚙️Compatibility
- Fixed Focus Laser Module (Should work with an additional 12V power supply)
- Jinsoku LE-1620
- Jinsoku LC-60A
Jinsoku LC-60A
🔌 Plug the 2-Pin connectors to the mainboard.
✔️ The software can control the start and stop of the air pump.
Jinsoku LE-1620
🔌 Plug the 2-Pin connectors to the mainboard.
❌️ The software CANNOT control the start and stop of the air pump.
3018-PROVer/LE5040/Other Genmitsu machines
💡 Additional 12V input power supply is required to run the air pump on these machines.
💡 Power supply is suggested to be 12V 1A with DC5.5*2.5 interface.
❌️ The software CANNOT control the start and stop of the air pump.