News

Engraving Vinyl Records with 3018-PRO

Engraving Vinyl Records with 3018-PRO

Written By Patrizio Virtuani WARNING! Do not try to cut vinyl with a laser; the heat of the beam on the vinyl surface generates a very toxic gas, vinyl chloride,...

2 comments

Engraving Vinyl Records with 3018-PRO

Posted by SainSmart on

Written By Patrizio Virtuani WARNING! Do not try to cut vinyl with a laser; the heat of the beam on the vinyl surface generates a very toxic gas, vinyl chloride,...

2 comments
View More
It Won't Be Moving!  Genmitsu Vacuum Table for 3018-PROVer

It Won't Be Moving! Genmitsu Vacuum Table for ...

A vacuum bed uses air pressure to push the stock down onto the bed by pumping out the air from underneath it, creating a partial vacuum. The resulting difference in air...

It Won't Be Moving! Genmitsu Vacuum Table for 3018-PROVer

Posted by SainSmart on

A vacuum bed uses air pressure to push the stock down onto the bed by pumping out the air from underneath it, creating a partial vacuum. The resulting difference in air...

View More
Comparison of what spindle motors are available for 3018 small routers

Comparison of what spindle motors are available...

Written by Graham Spindle Motors Comparison This is a comparison of spindle motors available for small routers, based on the SainSmart Genmitsu ‘3018’ family, including the 3020-PRO MAX. Physical Differences...

Comparison of what spindle motors are available for 3018 small routers

Posted by SainSmart on

Written by Graham Spindle Motors Comparison This is a comparison of spindle motors available for small routers, based on the SainSmart Genmitsu ‘3018’ family, including the 3020-PRO MAX. Physical Differences...

View More
Genmitsu Dust shoe for 52mm Spindle Motor

Genmitsu Dust shoe for 52mm Spindle Motor

Written by Graham I am using this on my 3020-PRO MAX. It’s not just a dust shoe for the 3020-PRO MAX, but a dust shoe for a 52mm diameter spindle...

1 comment

Genmitsu Dust shoe for 52mm Spindle Motor

Posted by SainSmart on

Written by Graham I am using this on my 3020-PRO MAX. It’s not just a dust shoe for the 3020-PRO MAX, but a dust shoe for a 52mm diameter spindle...

1 comment
View More
How I Increase the precision of Genmitsu CNC Router

How I Increase the precision of Genmitsu CNC Ro...

Increase the precision of Genmitsu CNC Router Provided by SainSmart Customer   Here follows what I did to the Genmitsu 3018-PRO CNC Router (Now only $199)  to achieve the precision...

How I Increase the precision of Genmitsu CNC Router

Posted by SainSmart on

Increase the precision of Genmitsu CNC Router Provided by SainSmart Customer   Here follows what I did to the Genmitsu 3018-PRO CNC Router (Now only $199)  to achieve the precision...

View More