Shop Categories
CNC & Engraving
3D Printing
- — 3D Printers
- — Filaments
- — TPU
- — PLA
- — PETG
- — Wood
- — More Filaments
- — Resins
- — Accessories
Tools & Instruments
- — Soldering
- — Oscilloscopes
- — Repair Tools
- — Others
Explore
-
![Genmitsu 1/8]()
13 reviewsGenmitsu 1/8" Shank 40-PCS CNC Cutter Milling Carving Bit Set, MC40A
High Quality -- The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
Applicable Materials -- Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility --The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$34.99
-
![Genmitsu 1/8]()
Genmitsu 1/8" Router Bit 10-PCS Flat Nose Set SF17, 2 Flute, Nano Blue Coating
- Number of Flutes: 2
- Cutting Edge Diameter (CED): 3.175mm (1/8") approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
SainSmart Genmitsu CNC Router Bits Value Kit Now Available in Store. Learn More.
$19.99$17.99SAVE $2.00
-
![Genmitsu 1/8]()
Genmitsu 1/8" Router Bit 10-PCS Ball Nose Set SB17, Nano Blue Coating
- Number of Flutes: 2
- Cutting Edge Diameter (CED): 3.175mm (1/8") approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
SainSmart Genmitsu CNC Router Bits Value Kit Now Available in Store. Learn More.
$24.99
-
![Genmitsu 1/8]()
Genmitsu 1/8" Shank 4-PCS 2-Flute Tapered Ball Nose End Mills Bits Set, TB04A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm ttungsten steel that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$19.99$17.99SAVE $2.00
-
![Genmitsu 1/8]()
Genmitsu 1/8" Shank 6-PCS Spiral Down Cut 2 Flute Tungsten Carbide Steel Alloy Milling Cutter Bit Set, SD06A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm Tungsten Carbide Steel Alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity, which provides longevity and produces cutting results of the highest quality.
Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles and dados, plunge cut leave with clean edge and top surface, better than straight bits.
Cost-Effective: It comes with 6PCS 2-flute spiral down-cut bits with different cutting length and overall length to meet your requirements. Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting length: 8-22mm (8/10/12/15/17/22mm), Overall length: 40-55mm (40/40/40/45/45/55mm)
Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.
Wide Compatibility: The SD06A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$29.99$27.99SAVE $2.00
-
![Genmitsu 1/8]()
Genmitsu 1/8" Shank 5-PCS 2-Flute Compression Spiral Bits Up-down Cut Set, SC05A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Up&Down Cut Advantage: The compression bits (up-down bits) offers the benefits of both up and down cut bits. The bit is a standard down cut, but its tip is an up cutter. Therefore, when cutting materials like plywood, you will end up with a clean edge on both sides because the top is pushed down while the bottom is pulled up.
Cost-Effective: Including 5pcs 2-flute compression spiral bits, Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 12, 15, 25, 28, 32mm / Overall Length:40, 55, 60, 65mm.
Recommend Material: Laminates, composites, plywood, plastic, soft metal etc. Note that compression bits should never be used to drill deep holes.
Wide Compatibility: Genmitsu SC05A 2-Flute compression bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$39.99
-
![Genmitsu CNC Long Neck Ball Nose Bit End Mill]()
Genmitsu CNC Long Neck Ball Nose Bit End Mill
Nano Blue Coat
Because of the high hardness and heat resistance, Nanoblue Coating is quickly becoming the coating of choice for CNC in industries that require high-performance tooling.
Tungsten Steel
Ultra-fine solid carbide tungsten steel material is outstanding for drilling and milling your CNC jobs.
Versatile
Genmitsu End Mill bits are capable of side milling, slot milling, and face milling, which can be used for many different purposes.
Applicable Materials
The nano bits have an HRC rating of 65 and are optimal for drilling a wide range of materials, including Wood, Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood, Plywood, PCB Circuit Board, Plastic, Fiber, Soft Metal, Aluminum, Copper, Glass, Porcelain, Ceramic, or Granite Stone.
Perfect Combination with Machine
Genmitsu CNC Router End Mills are compatible with most of the CNC machines on the market, including Genmitsu 3018 series & 3018-MX3, Makita, and other brand machines. Just make sure you select the correct-sized collet for your machine.
$14.99
-
![Genmitsu 2-Flute Tapered Ball Nose Spiral End Mill 4-Pack Set, 1/4]()
Genmitsu 2-Flute Tapered Ball Nose Spiral End Mill 4-Pack Set, 1/4" Shank, TB04B
High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with provides high hardness and heat resistance enablinges the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 4pcs of the 2-flute tapered ball nose spiral end mills, Shank Diameter: 1/4'' (6.35mm), Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 20mm, Overall Length: 50mm.
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models, and other other precision parts processing, these Tapered ball nose bits can do the best.
Applicable Materials: These Nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
Wide Compatibility: Genmitsu TB04B tapered ball nose spiral end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$49.99
-
![Genmitsu 10 PCS Straight Router Bits, 1/8'' shank, Nano Blue Coat, SR10A]()
Genmitsu 10 PCS Straight Router Bits, 1/8'' shank, Nano Blue Coat, SR10A
- High-quality: Made of Tungsten Carbide Steel Alloy. With super hardness, wear, break and corrosion resistant. This durable CNC bit with a long lifespan which can help you work efficiently.
- Shank diameter: 1/8'' (3.175mm) Shank; 30/60/90 deg 0.1mm v-bit. Commonly used in CNC engraving.
- Triangular V shape：Perfect for 2D lettering,sign making and 3D relief sculpturing. Ultra-fine carbide material ensures its engraving and milling performance. Easy to remove chips, not easy to stick dust.
- Applicable Materials: Suitable for such as hardwood, plywood, acrylic, plastic fiber, resin, PCB, aluminum, etc.
- Versatile: Widely used for metalwork, tool-making, model engineering, carving, cutting, engraving, milling, slotting, drilling, sculpting.
Milling Bits in a mess? - Genmitsu EVA CNC Milling Bit Storage Tray
$24.99
-
![Genmitsu 5 PCS 1/4]()
Genmitsu 5 PCS 1/4" shank Straight Router Bits, 2-Flute End Mill Cutter, SR05A
- High Quality: Made of tungsten steel that's great for milling and cutting performance, ensure your work efficiency. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break.
- Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal.
- Shank diameter: 1/4''(6.35mm), cutting diameter: 1/4'' (6.35mm), cutting length: 25mm, overall length: 55mm, comes with 5pcs 1/4 shank 2-Flute Straight Router Bits.
- Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling.
- Wide Compatibility: Genmitsu SR05A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
Milling Bits in a mess? - Genmitsu EVA CNC Milling Bit Storage Tray
$45.99
