Jinsoku LE-1620 Portable 5.5W Single Arm Laser Engraver
Easy Assembly & Large Working Area: Super easy to assemble and start cutting or engraving in minutes. Bigger engraving area (200mm X 160mm) than similar machines.
Advanced Motherboard: Test fire button enables you to easily run a trace of your project and knows exactly where your engraving or laser cut design will be in your stock material, return to zero, and pre-run for the perfect job every time; With XY axis double limit switch, one press to return to zero; Uses GRBL firmware compatible with Lightburn/laserGRBL, etc.
Height Adjustable Z-axis: Easily adjust the height of the laser to fit in materials of different heights and thicknesses. Expand your projects with a Rotary accessory or work with thicker materials.
Powerful Fixed Focus Laser Module: 5500MW optical power, 20W input power. Achieve 1 pass laser cutting without the need of air assist on materials like 3mm thick basswood board. Capable of engraving on all types of plastics, soft aluminum, woods, leather, acrylics, PVCs, and PCBs, the Jinsoku LE-1620 can be used on a wide range of projects and materials.
Professional Technical Support: Quick start tutorial is included in Installation Guide. If you get stuck, check out Jinsoku LE-1620 Quick Start Guide in the SainSmart Resource Center or contact us with any questions that arise.
Height Adjustable Z-axis
You can easily adjust the height of the laser to fit in materials of different heights and thicknesses.
Test Fire Design
Get the most out of your stock material by accurately tracing your work area before you start your engraving/cut.
1. Press the button to test fire.
2. Long Press the button to return XY to zero.
3. Press it to pre-run the engraving area (avoid engraving beyond the engraving material). Press it again to turn it off.
Powerful Laser Module
With 5500MW optical power, 20W input power, the fixed focus laser can not only prolong the service life of the laser head but also achieve maximum power. The drive and laser head are in-stalled sep-arately which reduces the weight of the single arm laser when engraving, making it more stable and easier to replace.
Focal length of laser module:
Adjustable height of laser:
200mm (Y) x 160mm(X)
GRBL firmware, compatible with Lightburn/laserGRBL etc.
Dimension after installation:
410mm x 400mm x 160mm
Windows XP, 7, 8, 10, Mac OS, and Linux
Before engraving with aluminum, please use a marker pen to blacken the metal surface to be engraved.