Creality3D CR-10 V2 3D Printerbrand: SainSmart SKU: 101-91-317A
TMC2208 ultra-quiet drive, high performance and stability, noise reduction and compression. It can create a quiet and efficient printing environment for you.
Two-way Cooling Fans & All-Metal Extruder
The heat dissipation is more uniform and fast, which effectively ensures the stability of the aperture precision, reduces the bad overflow of the plug, and has a better forming effect. The all-metal extrusion mechanism makes the feed more stable and wear-resistant, and the print model quality is better.
350W MeanWell Power Supply & Resume Print Feature
We adopt the Mean Well power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
Self-Installing BL-TOUCH Supported
The machine reserves the BL-TOUCH automatic leveling device architecture. Support self-installation, to meet your higher printing pursuit, but also enhance the DIY fun of self-installed.
Stability Triangle Frame
The Z-axis brace is linking to the top of the frame to the base, leading to the stability triangle frame. This unique design improves the printing precision due to reducing the error produced by the Z-wobble.
*Special Offer: Get 1 Roll ePA Nylon Filament for Free When Purchase with CR-10 V2 3D Printer. Code: FREEPA
The CR-10 V2 is an upgraded version of the CR-10 with better performance than the CR-10, with upgraded components and more extra accessories, if you are an experienced 3D printing enthusiast looking for an upgrade, look no further. CR-10 V2 will give you more printing fun than you will ever need.
- Printing Technology: FDM
- Print Area: 300 x 300 x 400mm(11.8 x 11.8 x 15.8”)
- Print Speed: ≤180mm/s, Normal 30-60mm/s
- Number of Nozzles: 1
- Accuracy: ±0.1mm
- Layer Thickness: 0.1-0.4mm
- Nozzle Diameter: 0.4mm
- Compatible Filaments: 1.75mm PLA, ABS, PETG, TPU
- Heated Bed Temperature: ≤100°C
- Mode of Operation: Connected to a PC or Offline with SD card
- Compatible Formats: stl, obj, amf
- Compatible Software: Cura/Repetier-Host/Simplify3D
- Operating System: MAC/Linux/WindowsXP/Vista/7/8/10
- Power Supply: Rated Voltage 115/230V; Output: 24V
- Rated Power: 350W
- Automatic Leveling: Optional
- 1 x CR-10 V2 3D Printer (Some parts need to be assembled)