SainSmart Blog

Running Candle for Different CNC Routers

Posted by SainSmart on December 18, 2022

Written By Graham Bland. You can find me on the Facebook group SainSmart Genmitsu CNC Users Group All comments, suggestions, and corrections are welcome. I have 6 different routers! There are also different spindle...

Tags: How-To

Making the Festive Harmony Ornaments

Posted by SainSmart on November 16, 2022

Written by Anastasia. You can find me on the Facebook group SainSmart Genmitsu CNC Users Group All comments, suggestions and corrections are welcome. This is a guide on how to make the star version of my Festive Ha...

Tags: Guest Blog , How-To

Announcing Our Partnership with Inventables' Easel Software!

Posted by SainSmart on June 21, 2022

SainSmart is happy to announce our partnership with Inventables. Featuring Easel and Easel Pro. ALL In One CNC Software. In our pursuit to deliver ease of use, value, and performance to our products, we believe this...

Tags: CNC , How-To , SAINSMART x Makers

It Won't Be Moving! Genmitsu Vacuum Table for 3018-PROVer

Posted by SainSmart on May 18, 2022

A vacuum bed uses air pressure to push the stock down onto the bed by pumping out the air from underneath it, creating a partial vacuum. The resulting difference in air pressure applies a quite large clamping force evenly over the stock. Using the suggested vacuum pump (sold separately) a clamping force of ~12 lbs is exerted over every square inch of the surface. 85 kPA is also ~0.9kg per cm². Let’s just say the stock is not moving unless you turn off the pump.

Tags: CNC , Guest Blog , How-To , Projects

Installing the 44mm Brushless Motor

Posted by SainSmart on February 24, 2022

Written by Graham B. This is a guide on installing and using the SainSmart 44mm 24V brushless motor on a 3018-PRO or 3018-PROVer.I am producing this as a document, mainly because it is an edited series of notes I mad...

Tags: CNC , How-To , Tutorials